Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!houxm!hjuxa!petsd!peora!ucf-cs!ennis
From: ennis@ucf-cs.UUCP (Jim Ennis)
Newsgroups: net.micro.amiga
Subject: Alink problem
Message-ID: <2411@ucf-cs.UUCP>
Date: Wed, 7-May-86 13:11:03 EDT
Article-I.D.: ucf-cs.2411
Posted: Wed May  7 13:11:03 1986
Date-Received: Sat, 10-May-86 07:15:17 EDT
Organization: Univ. of Central Florida, Orlando
Lines: 23

Hello,

  I am a new Amiga owner with a problem that I cannot figure out. I am getting
"Guru Mediation Mode" errors while running the ALINK program on the Lattice_C
3.03 disk. The program that I have created is a simple one that goes through
the compilation process with no errors but then dies in the ALINK program.
I have the memory expansion card and 2 disk drives so I think that I have
fullfilled all of the h/w requirements. The error code that I get can vary
between passes if I do thing differently, the most common code is:

   00000003.0000BA72

I would like to know how to read this error code or where that information is,
Who I should call if I can't get this product working. I am pretty happy with
my Amiga but this problem is keeping me from doing much with my Amiga and I am
nervous about this problem.

Jim Ennis
University of Central Florida
JIM%UCF1VM.BITNET@WISCVM.ARPA
ENNIS@UCF-CS.CSNET