Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!harvard!husc6!panda!genrad!decvax!bellcore!ulysses!mhuxr!mhuxn!ihnp4!houxm!mtuxo!mtune!mtunh!akguc!codas!peora!ucf-cs!notes
From: notes@ucf-cs.UUCP
Newsgroups: net.micro.amiga
Subject: Linker problem with Lattice C Progra
Message-ID: <2418@ucf-cs.UUCP>
Date: Tue, 13-May-86 07:20:45 EDT
Article-I.D.: ucf-cs.2418
Posted: Tue May 13 07:20:45 1986
Date-Received: Fri, 16-May-86 02:46:33 EDT
Sender: notes@ucf-cs.UUCP
Organization: Univ. of Central Florida, Orlando
Lines: 15
Nf-ID: #N:ucf-cs:90000001:000:503
Nf-From: ucf-cs!ennis    May  4 20:42:00 1986

Hello,

  I need some help with Lattice C and the linker. My Amiga drops into 
"Guru" mode while linking a very small C program. I am very new to the 
Amiga and I was wondering where I should look for help on Guru errors.
I have 512K RAM and 2 disk drives and as far as I can tell I am entering
the correct commands as described in the Lattice C info file. 

  I would appreciate any help that I can get as I am stuck in the water
right now.

Jim Ennis
JIM%UCF1VM.BITNET@WISCVM.ARPA
ENNIS@UCF-CS.CSNET