Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site cbmvax.cbmvax.cbm.UUCP
Path: utzoo!watmath!clyde!cbosgd!ukma!psuvm.bitnet!psuvax1!vu-vlsi!cbmvax!daveh
From: daveh@cbmvax.cbm.UUCP (Dave Haynie)
Newsgroups: net.micro.amiga
Subject: Re: Linker problem with Lattice C Progra
Message-ID: <262@cbmvax.cbmvax.cbm.UUCP>
Date: Tue, 20-May-86 13:58:16 EDT
Article-I.D.: cbmvax.262
Posted: Tue May 20 13:58:16 1986
Date-Received: Fri, 23-May-86 07:45:04 EDT
References: <2418@ucf-cs.UUCP>
Reply-To: daveh@cbmvax.UUCP (Dave Haynie)
Organization: Commodore Technology, West Chester, PA
Lines: 22

In article <2418@ucf-cs.UUCP> notes@ucf-cs.UUCP writes:
>Hello,
>
>  I need some help with Lattice C and the linker. My Amiga drops into
>"Guru" mode while linking a very small C program. I am very new to the
>Amiga and I was wondering where I should look for help on Guru errors.
>I have 512K RAM and 2 disk drives and as far as I can tell I am entering
>the correct commands as described in the Lattice C info file.
>
You probably have your stack set too low.  The default is 4000, but the
linker usually need something in the 10000 to 20000 range.  Type:

STACK 10000

or whatever at the CLI prompt.

--

Dave Haynie    {caip,inhp4,allegra,seismo}!cbmvax!daveh
               "There, beyond the bounds of your weak imagination
                Lie the noble towers of my city, bright and gold"
                                                                -Genesis