Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!harvard!husc6!panda!genrad!decvax!decwrl!dec-rhea!dec-highfi!mickol
From: mickol@dec-highfi.UUCP
Newsgroups: net.micro.amiga
Subject: DPAINT & Interlace
Message-ID: <3122@decwrl.DEC.COM>
Date: Tue, 20-May-86 13:56:04 EDT
Article-I.D.: decwrl.3122
Posted: Tue May 20 13:56:04 1986
Date-Received: Sat, 24-May-86 01:44:36 EDT
Sender: daemon@decwrl.DEC.COM
Organization: Digital Equipment Corporation
Lines: 16

Does anyone know how to use DPAINT in lo-res mode with interlace turned on.
Although I am able to record the NTSC output from DPAINT with little trouble,
there is a noticable distortion in the middle of the picture from improper
field syncronization. Also, both 1/2" and 3/4" editing systems indicate
this when I pause (still-frame) or use slow motion. I get the flagging at the 
top middle of the screen. I do most of my work in lo-res mode. Supposedly,
hi-res mode is interlaced, but it is too much of a pain to use due to memory 
limitations (yes, I have 512K). Thanks, in advance, for any help the net can 
provide.

Jim Mickol
Digital Equipment Corp.
Maynard, Mass
Work: 617-493-9609
Home: 617-529-4687