Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!lll-crg!lll-lcc!qantel!hplabs!felix!scgvaxd!wlbr!jplgodo!steve
From: steve@jplgodo.UUCP (Steve Schlaifer x3171 156/224)
Newsgroups: net.micro.apple
Subject: Re: Modem Interfacing ????'s
Message-ID: <788@jplgodo.UUCP>
Date: Thu, 15-May-86 00:00:06 EDT
Article-I.D.: jplgodo.788
Posted: Thu May 15 00:00:06 1986
Date-Received: Sun, 18-May-86 12:29:25 EDT
References: <4600017@uiucdcsb>
Organization: Jet Propulsion Labs, Pasadena, CA
Lines: 20
Summary: a vt100 emulator was recently posted

In article <4600017@uiucdcsb>, hoffman@uiucdcsb.CS.UIUC.EDU writes:
> 	I'm having some capatability problems with my Apple II+, Hayes
> Smartmodem 1200, and a Super Serial Card.
> 	What I initially need to know is which, if any, modem software 
> programs can I use with this set-up?

There was a vt100 emulator recently posted to the net that works with
this combination.  If you can't get it anywhere else I could probably
dig it up.  I think things like ASCII Express should work with this
combination but I have never tried it.  I use MDM720 on my Z80 card or
a home-brew program in my own version of FORTH depending on what I am
doing.

-- 

...smeagol\			Steve Schlaifer
......wlbr->!jplgodo!steve	Advance Projects Group, Jet Propulsion Labs
....group3/			4800 Oak Grove Drive, M/S 156/204
				Pasadena, California, 91109
					+1 818 354 3171