Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU Path: utzoo!watmath!clyde!burl!ulysses!ucbvax!XEROX.COM!Steele.Henr From: Steele.Henr@XEROX.COM Newsgroups: net.micro.atari8 Subject: 600Xl 64Kmemory upgrade Message-ID: <860425-071451-2318@Xerox> Date: Fri, 25-Apr-86 10:14:49 EDT Article-I.D.: Xerox.860425-071451-2318 Posted: Fri Apr 25 10:14:49 1986 Date-Received: Sun, 27-Apr-86 05:59:27 EDT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 42 Can someone on the net tell me how to respond to this message from: ucdavis!lll-lcc!lll-crg!caip!seismo!umcp-cs!cvl!umd5!hans@ucbvax.berkeley.edu (Hans Breitenlohner). I tried to send my reply to him but the entire return path was too long. I shortened the return path to: lll-crg!caip!seismo!umcp-cs!cvl!umd5!hans@ucbvax.berkeley.edu and the message was sent but I do not know if it has been received. Is the above the correct way for a person at Xerox to respond to this ARPA net address? >From: >ucdavis!lll-lcc!lll-crg!caip!seismo!umcp-cs!cvl!umd5!hans@ucbvax.berkeley.edu >(Hans Breitenlohner) >Organization: U of Md, CSC, College Park, Md >Subject: Memory upgrade for 600XL >Message-Id: <928@umd5.UUCP> >Sender: postmast@cornella.BITNET (fix your mailer) >Real-Annoyed-Sender: usenet@ucbvax.berkeley.edu >Errors-To: >To: info-atari8@score.stanford.edu >I recently upgraded a 600XL from 16K to 64K ram. Materials required: two >64K x 4 memories and three pieces of wire (cost about $12). >Time required: about 1/2 to 1 hour. (That does not include time to figure >out how to do it, of course). >It probably voided my warranty (:-). >If there is any interest, I will write up instructions and post them. >>Please ,do write up instructions and post them. I have wanted to do the same >>thing for awhile but without schematics it was going to take more time than I >>wanted to spend on it. But, if I don't have to re-invent the wheel I won't. >> I be looking forward to seeing the instructions. Do you have schematics of >>an Atari 600XL? If so I'd like to discuss the possibility of getting a copy. Thanks in advance, John steele XeroxAtari8Users^.X