Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!ihwpt!cptvideo
From: cptvideo@ihwpt.UUCP (D. Vlack)
Newsgroups: net.micro.atari8
Subject: Gemini Printer Driver for Atariwriter+
Message-ID: <875@ihwpt.UUCP>
Date: Tue, 20-May-86 22:53:03 EDT
Article-I.D.: ihwpt.875
Posted: Tue May 20 22:53:03 1986
Date-Received: Sat, 24-May-86 17:32:45 EDT
Distribution: net
Organization: AT&T Bell Laboratories
Lines: 44

There has been some traffic in this group asking about
printer drivers for the GEMINI-10X for use with Atariwriter+.

The following is the one that seems to work fine for me. I am
posting it since the built in EPSON driver did not work for 
me either:

initialize		-
LF/CR			155
underline off		27,45,0
underline on		27,45,1
backspace		-
elongate off		27,87,0
elongate on		27,87,1
bold off		27,72
bold on			27,71
1/2 up			-
1/2 down		27,65,6,10,27,65,12
1/2 down/CR		27,65,6,155,27,65,12
CR -no LF		27,74,1,155,27,74,24
font #1			27,84,27,66,1
font #2			27,84,27,66,3
font #3			27,84,27,66,2
font #4			27,83,0
font #5			27,83,1
font #6			27,84,27,66,2
font #7			27,52
font #8			27,53
font #9			27,84


Notes-----	155 seems to be needed as the LF/CR code or double
		column printing will crash.

		G1=10 cpi
		G2=17 cpi
		G3=G6=12 cpi
		G4= start superscripts
		G6= start subscripts
		G7= start italics
		G8= end italics
		G9= end super/subscripts

Hope this helps for the AW+ and Gemini owners.