Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!panda!husc6!harvard!caip!daemon
From: prindle@nadc
Newsgroups: net.micro.cbm
Subject: re: Turning BASIC ROM into RAM
Message-ID: <2172@caip.RUTGERS.EDU>
Date: Tue, 6-May-86 09:28:19 EDT
Article-I.D.: caip.2172
Posted: Tue May  6 09:28:19 1986
Date-Received: Wed, 7-May-86 06:09:59 EDT
Sender: daemon@caip.RUTGERS.EDU
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 9

From: prindle@NADC

This is very easy.  All you have to do is copy BASIC ROM to RAM first (just
peek each location between a000 and bfff, and poke with the same value -
poke address,peek(address)  ), then flip the LORAM bit in memory byte 1.  It
is done, you are now running BASIC out of RAM - modify at your own risk, prefer-
rably flipping back to ROM BASIC while doing modifications to the RAM version.
Frank Prindle
Prindle@NADC.arpa