Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!umcp-cs!nbs-amrf!sauder
From: sauder@nbs-amrf.UUCP (Jeff Sauder)
Newsgroups: net.micro.cbm
Subject: vt100 emulator for C128 or CP/M
Message-ID: <308@nbs-amrf.UUCP>
Date: Fri, 16-May-86 11:22:23 EDT
Article-I.D.: nbs-amrf.308
Posted: Fri May 16 11:22:23 1986
Date-Received: Sun, 18-May-86 14:52:32 EDT
Distribution: net
Organization: National Bureau of Standards
Lines: 18

I recently acquired a vt100 emulator that runs on my C128.  After
purchasing the necessary 80 column monitor, I found that the
emulator will not emulate the vax edt keypad editor.  Since this
was my reason for purchasing the monitor (and getting the
emulator), I am now looking for a better vt100.  I have a very good
one for my C64, but cannot use the keypad in 64 mode.

First, do any emulators exist which will allow the keypad to be
used via modem hookup?  Second, does anyone know where a GOOD vt100
emulator can be obtained, either for the C128 or for CP/M (the
Commodore compatible type)?  I would appreciate feedback from
people -- even if it's of the type, "I've been looking for a long
time and haven't found anything."  My present vt100 for the 128
came off of a bulletin board service called Quantum Link, so don't
tell me to look there.  Thanks!
-- 

Jeff Sauder     {seismo,umcp-cs}!nbs-amrf!sauder