Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!decwrl!pyramid!pesnta!fai!amdahl!lfk00
From: lfk00@amdahl.UUCP
Newsgroups: net.micro.cbm
Subject: MPS 1000 printer and PaperClip
Message-ID: <3245@amdahl.UUCP>
Date: Mon, 19-May-86 18:07:34 EDT
Article-I.D.: amdahl.3245
Posted: Mon May 19 18:07:34 1986
Date-Received: Thu, 22-May-86 06:18:12 EDT
Distribution: na
Organization: Amdahl Corporation, Portland OR
Lines: 26
Keywords: on-output ibm-mode

I just purchased the CBM MPS1000 printer and the PaperClip word
processor for the C64.  PaperClip seems to get along fine with
the printer, as long as it stays in 1525 (*yecch*) mode.  I would
like to be able to use the IBM mode of the printer with PaperClip.

I have defined a new printer file for the IBM mode, but so far have
not been able to get any output.  I built my printer file using
almost all of the same sequences as defined for the MX80 series III
printers.  When I try to print, I get nothing but I know that the
system is trying to use the printer because pushing the offline
switch on the printer causes screen output to stop.

Any help would be greatly appreciated.  Please respond via elect.
mail.

Thanks in advance,

-- 
     Lynn Kerby  -  Amdahl Corporation
                    Sunnyvale, Ca.
                    ...inhp4!amdahl!lfk00

Disclaimer: Any and all opinions expressed herein are my own and do not
            necessarily represent the views of anyone, especially my
            employer.