Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site ecsvax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!mcnc!ecsvax!ubsims
From: ubsims@ecsvax.UUCP (William K. Sims)
Newsgroups: net.micro.cbm
Subject: Re: vt100 emulator for C128 or CP/M
Message-ID: <1611@ecsvax.UUCP>
Date: Sat, 24-May-86 23:16:11 EDT
Article-I.D.: ecsvax.1611
Posted: Sat May 24 23:16:11 1986
Date-Received: Mon, 26-May-86 06:48:01 EDT
References: <308@nbs-amrf.UUCP>
Distribution: net
Organization: North Carolina Educational Computing Service
Lines: 33

> I recently acquired a vt100 emulator that runs on my C128.  After
> purchasing the necessary 80 column monitor, I found that the
> emulator will not emulate the vax edt keypad editor.  Since this
> was my reason for purchasing the monitor (and getting the
> emulator), I am now looking for a better vt100.  I have a very good
> one for my C64, but cannot use the keypad in 64 mode.
> 
> First, do any emulators exist which will allow the keypad to be
> used via modem hookup?  Second, does anyone know where a GOOD vt100
> emulator can be obtained, either for the C128 or for CP/M (the
> Commodore compatible type)?  I would appreciate feedback from
> people -- even if it's of the type, "I've been looking for a long
> time and haven't found anything."  My present vt100 for the 128
> came off of a bulletin board service called Quantum Link, so don't
> tell me to look there.  Thanks!
> -- 
> 
> Jeff Sauder     {seismo,umcp-cs}!nbs-amrf!sauder


Jeff Sauder, I would suggest you get a copy of the 
ANCHOR AUTOMATION, INC software package. The software 
emulates the VT100 on the C128, as a matter of fact this is
what I am using now on the Unix system. I works very well,
I have had no problems using the VT100 at all. The name of 
this software is "AUTOCOM128/80" and is available from the 
=============== ANCHOR AUTOMATION, INC ===================
=============== 6624 VALJEAN AVENUE    ===================
=============== VAN NUYS, CALIFORNIA   ===================
=============== 91406 U.S.A.           ===================
=============== (818) 997-6493)        ===================
If I can be of any further help drop me a line via E-mail
(ubsims@ecsvax) Univ. of North Carolina, Chapel Hill, N.C.