Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!mcnc!ecsvax!alford
From: alford@ecsvax.UUCP (Ross Alford)
Newsgroups: net.micro.cbm
Subject: C128 CP/M CONFIG command?
Message-ID: <1614@ecsvax.UUCP>
Date: Sun, 25-May-86 09:59:33 EDT
Article-I.D.: ecsvax.1614
Posted: Sun May 25 09:59:33 1986
Date-Received: Mon, 26-May-86 23:14:13 EDT
Distribution: net
Organization: Duke University Zoology
Lines: 16


Some time ago in an article posted to this newsgroup, Frank Prindle
(Prindle@NADC.ARPA) detailed some benchmarking he had done using C128 CP/M
He suggested that for fastest operation, the 40 column display should be
turned off, and suggested including a line like:
CONFIG BAUD=110,40COL=OFF
in the PROFILE.SUB file to be executed at boot time.  Sounds good, and I'd
sure like to speed the 128 up a bit, but I can't find a command called
CONFIG anywhere in the CP/M distribution, either the original disks that
came with the computer or the disks I got by sending off for the DR manuals
and extra disks.  Has anyone got any suggestions?  Is CONFIG something that's
only available on Compu-Serve?  

Thanks,
Ross Alford
   ...mcnc!ecsvax!alford