Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!cbosgd!gatech!gitpyr!huang
From: huang@gitpyr.UUCP (Jenn-Ming Huang)
Newsgroups: net.micro.cpm
Subject: Re: Developing Z80 code on IBM PC
Message-ID: <1739@gitpyr.UUCP>
Date: Sat, 3-May-86 03:35:07 EDT
Article-I.D.: gitpyr.1739
Posted: Sat May  3 03:35:07 1986
Date-Received: Wed, 7-May-86 01:30:54 EDT
References: <2763@sdcrdcf.UUCP>
Distribution: net
Organization: Georgia Institute of Technology
Lines: 21
Summary: z80 assembler and simulator on IBM PC

In article <2763@sdcrdcf.UUCP>, alex@sdcrdcf.UUCP (Alex Hwang) writes:
> I am in a situaion where I need to develop code on an IBM-PC but the
> debugged code is going to run on a custom Z80 board. I am interested
> in any information relating to the following :
> 
> 	1. Z80 or CP/M cards on IBM-PC.
> 	2. Cross-compiler or cross-assembler between 8088 and Z80.
> 	3. 1Mbit EPROM or EEPROM burner with interface to IBM-PC.
> 	4. Any development tools, software or hardware, that can help me
> 	   develop, download, and debug code on IBM-PC for Z80 CPU.
> 
> Thanks.
> 
> 			Alex Hwang


       There are Z80 assembler (Xasm85) and simulaor (AVSim Z80)

       available from AVOCET SYSTEMS, INC., 120 Union St., Rockport,
 
       Maine 04825, TEL: 800/448-8500.