Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.14 $; site siemens.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!princeton!siemens!settle
From: settle@siemens.UUCP
Newsgroups: net.micro.pc
Subject: Wanted: C-comipiler info
Message-ID: <23900017@siemens.UUCP>
Date: Tue, 29-Apr-86 14:01:00 EDT
Article-I.D.: siemens.23900017
Posted: Tue Apr 29 14:01:00 1986
Date-Received: Sat, 3-May-86 19:37:59 EDT
Lines: 18
Nf-ID: #N:siemens:23900017:000:608
Nf-From: siemens!settle    Apr 29 14:01:00 1986




I am currently looking for a good C compiler for an IBM PC XT or AT.  Either
one is available.  What is important is that it support graphics routines.
I don't need anything fancy, just basics.  If anyone out there has had any
experience with or information on any compilers, I would greatly appreciate
you dropping me a line.  

Thanx in advance,

==============================================================================
Ken Settle
Siemens RTL             {ihnp4|astrovax|allegra|dshovax}!siemens!settle
Princeton, NJ

"Hindsight is so confoundedly futile!"		-Frank Herbert
						_Hellstrom's_Hive_