Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!vrdxhq!verdix!ogcvax!omssw2!reed!tektronix!uw-beaver!uw-june!entropy!dataio!pilchuck!del
From: del@pilchuck.UUCP (Erik )
Newsgroups: net.micro.pc
Subject: AT disk controller
Message-ID: <333@pilchuck.UUCP>
Date: Sat, 3-May-86 16:41:54 EDT
Article-I.D.: pilchuck.333
Posted: Sat May  3 16:41:54 1986
Date-Received: Thu, 8-May-86 20:18:20 EDT
Organization: Data I/O Corp., Redmond, WA
Lines: 13

[eatme]
I am looking at an AT or compatible and have a question re: disk controller.

My current PC has a 3.5" micro disk attached to it. If I get an AT, I figure
I'll need the 1.2M floppy, a 360k floppy, and I would hate to loose my 3.5".
Since the AT does not provide for an extra drive connector coming out the 
back of the thing, the question is: are the hardware select lines there and
just no additional connector provided, or is it impossible? I could easily 
manufacture a cable to connect my 3.5 inch drive if the hardware support is
there, but otherwise, what are my options?


Thanks.