Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!inuxc!iubugs!iuvax!access
From: access@iuvax.UUCP
Newsgroups: net.micro.pc
Subject: Re: Multiple Winchesters On A Western Di
Message-ID: <1500056@iuvax.UUCP>
Date: Sat, 24-May-86 20:18:00 EDT
Article-I.D.: iuvax.1500056
Posted: Sat May 24 20:18:00 1986
Date-Received: Tue, 27-May-86 07:21:30 EDT
References: <804@kontron.UUCP>
Lines: 9
Nf-ID: #R:kontron:-80400:iuvax:1500056:000:445
Nf-From: iuvax!access    May 24 19:18:00 1986


  I think it depends on the ROM that came with the card.  I have a
WD controller on which I am running 2 20 meg drives.  The 34 pin
cable has to be replaced with a two connector cable or be fixed with
a 34 pin connector from Radio Shack or similar store.  J2 should be
connected to the second drive.  That's about as far as I can recall
at the moment.  Someone else please take it from here!

Bob  access@iubacs (bitnet)  access@iuvax (uucp)