Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!ucbvax!hplabs!oliveb!dchen From: dchen@oliveb.UUCP (Dennis Chen) Newsgroups: net.unix-wizards Subject: telnet problem Message-ID: <850@oliveb.UUCP> Date: Fri, 16-May-86 18:11:21 EDT Article-I.D.: oliveb.850 Posted: Fri May 16 18:11:21 1986 Date-Received: Mon, 19-May-86 06:15:08 EDT Reply-To: dchen@oliveb.UUCP (Dennis Chen) Organization: Olivetti ATC; Cupertino, Ca Lines: 34 Keywords: flow control, DH/DM We have a very serious problem of 'telnet' program in our VAXen 11/{750,785} 4.2 BSD Unix. The symptom seems to me is flow control problem (lost characters, gobble the screen when cat'ing file). The followings are the tests dealt with the 'telnet' program: Flow control problem occurs with any of following tests: 1. Use a VT100, "telnet" from VAX 11/{750,785} 4.2BSD Unix to VAX 11/{750,785} 4.2BSD Unix 2. Use a VT100, "telnet" from VAX 11/(750,785} 4.2BSD Unix to VAX 11/750 VMS with Wollongong Group TCP/IP 3. Use a VT100, "telnet" from VAX 11/{750,785} 4.2BSD Unix to VALID workstation based 4.2BSD Unix. And vise versa. NO flow control problem with any of following tests: 1. Use a VT100, "telnet" from VAX 11/750 VMS to VAX 11/750 4.2BSD Unix 2. Use an IBM PC or Olivetti M24 PC with kermit, "telnet" just works fine between two VAXen running 4.2BSD Unix 3. Use an IBM PC or Olivetti M24 PC with kermit, "telnet" just works fine between VAX 4.2BSD and VAX VMS. 4. Rlogin between two VAXen 4.2BSD Unix From test 1. I can tell there is no problem with the telnet server, "telnetd". Therefore, I would suspect there is flow control problem somewhere either in "telnet" or serial line driver. Note that all the serial interface cards we used are DH/DMs, and the ethernet boards we used are either 3COM or Interlan. Has anyone in the net has this problem ? Any suggestion would be greatly appreciated ? Thanks in advance Dennis Chen {allegra, fortune, glacier, hplabs, ihnp4}!oliveb!dchen