Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU Path: utzoo!decvax!bellcore!ulysses!ucbvax!OPAL.BERKELEY.EDU!mwm From: mwm@OPAL.BERKELEY.EDU (Mike Meyer, I'll be mellow when I'm dead) Newsgroups: mod.computers.68k Subject: [Hans Breitenlohner: Re: Atari 1040ST Question] Message-ID: <8605220335.AA20330@ucbopal.Berkeley.Edu> Date: Wed, 21-May-86 23:35:17 EDT Article-I.D.: ucbopal.8605220335.AA20330 Posted: Wed May 21 23:35:17 1986 Date-Received: Thu, 22-May-86 06:33:53 EDT Sender: mwm@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 45 Approved: info-68k@ucbvax.berkeley.edu ------- Forwarded Message Received: from ucbvax.Berkeley.EDU (ucbvax-il.Berkeley.Edu) by ucbopal.Berkeley.Edu (4.19/5.3) id AA15107; Wed, 21 May 86 12:03:53 pdt Received: by ucbvax.Berkeley.EDU (5.51/1.13) id AA29264; Wed, 21 May 86 12:03:28 PDT Return-Path: Received: by umd5.UMD.EDU (5.5/umd.03) id AA02646; Wed, 21 May 86 14:01:30 EDT Date: Wed, 21 May 86 14:01:30 EDT From: Hans Breitenlohner Message-Id: <8605211801.AA02646@umd5.UMD.EDU> To: info-68k-request@ucbvax Subject: Re: Atari 1040ST Question Newsgroups: mod.computers.68k Subject: Re: Atari 1040ST Question References: <8605170514.AA27537@ucbvax.Berkeley.EDU> Reply-To: hans@umd5.UUCP (Hans Breitenlohner) Distribution: net Organization: University of Maryland, College Park In article <8605170514.AA27537@ucbvax.Berkeley.EDU> HELLER@umass-cs.CSNET (Stride 440 User) writes: > > I am thinking of get an Atari 1040ST as a second computer for >use "at the office". I already have a Stride 440 at home running >CP/M-68K. The Stride has two 5.25" DSDD 96TPI floppy drives. I have >heard that the Atari also runs CP/M-68K underneath a layer or two of >graphics/window hackery. The Atari has a built in 3.5" floppy drive >and a port for a second floppy drive. My question is: can I put a >5.25" DSDD 96TPI floppy drive on the Atari as a second drive? If >this is posible it would make it posible to easily move files between >the Stride (at home) and the Atari (at work). (The Atari at work >would have a direct serial connection to the VAXen I use at work, >thus I can use Kermit to move files between the Atari and the VAXen.) > > Robert Heller The November, 1985 issue of ANTIC magazine (Vol 4, No. 7) has an article on how to do that. ------- End of Forwarded Message