Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU Path: utzoo!decvax!bellcore!ulysses!ucbvax!msudoc.UUCP!lawitzke From: lawitzke@msudoc.UUCP (John Lawitzke) Newsgroups: mod.computers.laser-printers Subject: posting for mod.computers.laser-printers Message-ID: <8605291904.AA04850@msudoc.ARPA> Date: Thu, 29-May-86 15:04:21 EDT Article-I.D.: msudoc.8605291904.AA04850 Posted: Thu May 29 15:04:21 1986 Date-Received: Sat, 7-Jun-86 13:34:28 EDT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 32 Approved: laser-lovers@washington.arpa The following is the editted article that was returned for editting The following is a posting for mod.computers.laser-printers This is in regards to the Hewlitt-Packard LaserJet Printer. I need to receive a copy of the escape sequences for the B,D, and J font cartridges. I know I can do them by hand, but..... Anyway, we had them but some idiot (my boss shall remain nameless) threw them out. These are the escape sequences that are sent to the HP Laserjet to trigger internal font switching. The environment or configuration of the host machine would have no effect on what the sequence is. Also, we are currently using the HP on an IBM running Wordmarc Anybody in net-land have experience with this combo? I've had some modest success with it, but font changes are a _____. We are also about to set up a VAX8600 w/ Ultrix1.2 any suggestions on a package to use for the HP on the VAX? ********* John H. Lawitzke * * 260 Engineering Bd. * ** ** * Michigan State University * ** ** * E. Lansing, MI, 48823 * * * * * * office: (517) 353-5984 * * home: (517) 332-3610 * ***** * * * ...!ihnp4!msudoc!lawitzke *******