Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!decwrl!pyramid!hplabs!ucbvax!rpics.CSNET!schoff
From: schoff@rpics.CSNET.UUCP
Newsgroups: mod.protocols.appletalk
Subject: Two Kinetics on AppleTalk?
Message-ID: <8606112219.AA29357@ucbvax.Berkeley.EDU>
Date: Thu, 5-Jun-86 21:35:25 EDT
Article-I.D.: ucbvax.8606112219.AA29357
Posted: Thu Jun  5 21:35:25 1986
Date-Received: Thu, 12-Jun-86 03:29:36 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 14
Approved: info-applebus@c.cs.cmu.edu


At RPI we're thinking about trying to extend the AppleTalk
with some unshielded cable plant that we have between two
buildings, (total length less than the apple specs).
A number of additional
macs can join the Class C network and be MacIP participants.
As it happens there are a couple of Ethernet capable machines
in that remote building and I have been thinking about
the relatively cheap possability of putting a 2nd Kinetics/UDP
style gateway over there on the same AppleTalk.  The current
software does not look like I can get the two building Ethernets
to communicate.  Any suggestions or pointers to ongoing projects??

marty