Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!decwrl!pyramid!hplabs!tektronix!orca!pogo!richr
From: richr@pogo.UUCP
Newsgroups: net.micro.amiga
Subject: Re: Howdy!, Hardware expansion docs
Message-ID: <2552@pogo.UUCP>
Date: Thu, 12-Jun-86 23:17:37 EDT
Article-I.D.: pogo.2552
Posted: Thu Jun 12 23:17:37 1986
Date-Received: Fri, 13-Jun-86 17:54:59 EDT
References: <1242@well.UUCP> <2339@watdcsu.UUCP>
Reply-To: richr@pogo.UUCP (Rich Rodgers)
Distribution: na
Organization: Creative Microsystems Inc.
Lines: 33
Keywords: Expansion

In article <2339@watdcsu.UUCP> demo@watdcsu.UUCP( Rick Attenborough) writes:
>
>Welcome back to the fold to to of the lost sheep, namely RJ Mical and 
>Bob Pariseau. Hopefully this will again mean more original information 
	Second that!!

>Now for the first request do either of you have the specs for the
>hardware expansion and can you post it . if you are for some reason
>not allowed to please tell us this. The posting of this information

The hardware specs are by no means "hush hush" information.  They do, however,
consume MANY pages of text, and are of little use to the home hobbiest.  The
expansion architecture is a complicated, well thought out specification.  It
would be difficult at best to produce a product that meets the spec without the
availability of a PROM programmer.  If all you are after is the spec for the
100 pin connector, that would be easy.  If you want the whole ball of wax, you
should contact C/A directly.

C/A was very helpful to my company, answered all our questions (time and again)
and gave prompt, updated information.  We were unknown to C/A and could have
been just hackers, but they helped us anyway.  If you are serious about getting
the specification I suggest you call up Los Gatos and ask them for it.  You
can, in fact, call West Chester but they will tell you to call Los Gatos
anyway.
	
	Commodore-Amiga
	Los Gatos, CA
	(408) 395-6616
Good Luck!!!
-- 
				Rich Rodgers

				tektronix!pogo!richr