Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!columbia!caip!nike!cad!ucbvax!PAVEPAWS.BERKELEY.EDU!dillon
From: dillon@PAVEPAWS.BERKELEY.EDU (Matt Dillon)
Newsgroups: net.micro.amiga
Subject: --Bug report--
Message-ID: <8606101837.AA15535@pavepaws>
Date: Tue, 10-Jun-86 14:37:43 EDT
Article-I.D.: pavepaws.8606101837.AA15535
Posted: Tue Jun 10 14:37:43 1986
Date-Received: Sat, 14-Jun-86 05:34:45 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: University of California at Berkeley
Lines: 31

Description:
	memory masher, really strange stuff.  The program eventually crashes the
	machine.  Here is a list:

	(1)
		Select the 'Copy To'... this works fine, but sometimes when your in
		Copy-to mode, and you use the right menu button to get the menu,
		garbage appears on the screen when the pointer is over some of the
		headers.

	(2)
		Saving fonts always seems to work, but something in FontEd seems
		to permanently screw the machine.  After a while, when you try to
		load a font you've just saved (even by getting out of FontEd and 
		re-executing FontEd and THEN reloading the font), it comes up
		a previous version of the font???!!?  Rebooting the machine via
		ctl-A-A and re-executing FontEd and THEN reloading the font seems
		to work ok.

Repeat-By:
	In above description.  Specifically for #2:

		Get a font (topaz 8), resized to 7x7. cleared it, created a '!',
		saved it.  Added stuff alltheway up to 'K', saved it.  Reloaded
		the font (didn't work... got just the '!').  Rebooted the machine
		and reloaded the font (did work).

Possible_Cause:
	Something in FontEd is mashing memory, I would guess.