Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!princeton!caip!think!nike!ucbcad!ucbvax!PAVEPAWS.BERKELEY.EDU!dillon
From: dillon@PAVEPAWS.BERKELEY.EDU (Matt Dillon)
Newsgroups: net.micro.amiga
Subject: Re: Help for weird error with serial port! (again)
Message-ID: <8606240036.AA09038@pavepaws>
Date: Mon, 23-Jun-86 20:36:44 EDT
Article-I.D.: pavepaws.8606240036.AA09038
Posted: Mon Jun 23 20:36:44 1986
Date-Received: Wed, 25-Jun-86 06:25:00 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: University of California at Berkeley
Lines: 14


	Sounds like you didn't initialize your XON-XOFF characters.  One
of them is probably zero.  This would cause the symptoms you described (
being able to receive characters but not being able to send characters!&Fgte t`at qgu eust be sure tg re%set t`e SERFWPDASABDED bat setaf t`e seraad fdags befgre t`e gpef  afd mikm({}zm(i|/s the bit is set
everytime you do a SDCMD_SETPARAMS to.  

	Check the return code for SDCMD_SETPARAMS to make sure it actually
set the parameters.  If it gives an error, you did not initialize one of
the parameters correctly. 

				-Matt