Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 (USS@Tek, v1.1) based on 4.3bsd-beta 6/6/85; site tekred.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!tektronix!tekgen!tekred!richa
From: richa@tekred.UUCP (Rich Amber )
Newsgroups: net.micro.atari16
Subject: DEGAS and CAD 3D
Message-ID: <574@tekred.UUCP>
Date: Wed, 4-Jun-86 12:00:37 EDT
Article-I.D.: tekred.574
Posted: Wed Jun  4 12:00:37 1986
Date-Received: Sat, 7-Jun-86 09:01:26 EDT
Organization: Tektronix, Inc., Beaverton, OR
Lines: 19
Keywords: printing

I have just acquired the DEGAS art program (for 520ST) and the
CAD 3D program.  If anyone else has these, perhaps you can help
me understand why I can't seem to print the art from CAD 3D.

I can successfully load and use CAD 3D. The printout function
only prints X,Y,Z coordinates. I've read the manual and find
the merest allusion to loading the SUPERVIEW picture file into
DEGAS to actually print the picture. There does not apear to be
a statement of hard fact as to how printing should be accomplished.

If I enter DEGAS and try to load any *.3D pic file, I get an error
message that says something like "file cannot be loaded because the
resolution is not compatible with current setting." Come on, give
me a break! I have a monochrome monitor and I used the file in the
CAD 3D program, but can't use it in DEGAS and I changed nothing.
So what's the problem?
                            Rich Amber
                            Redmond, Oregon (503) 923-4411