Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!topaz!ll-xn!nike!lll-crg!seismo!gatech!rayssd!dpw
From: dpw@rayssd.UUCP (Darryl P. Wagoner)
Newsgroups: net.micro.att
Subject: Re: Racal-Vadic 3451 and UNIC-PC V3 (with unrelated uucp problem unrelated).
Message-ID: <2333@rayssd.UUCP>
Date: Fri, 27-Jun-86 12:25:02 EDT
Article-I.D.: rayssd.2333
Posted: Fri Jun 27 12:25:02 1986
Date-Received: Sat, 28-Jun-86 09:23:37 EDT
References: <3046@jhunix.UUCP>
Sender: dpw@rayssd.UUCP (Darryl P. Wagoner @ Raytheon Co., Portsmouth RI)
Distribution: net
Organization: Raytheon Co., Portsmouth RI
Lines: 25

Thanks for shedding some light on that problem.  
> 
> The AT&T folk claim that there should be no difference between
> the earlier Version 2 phone manager and Version 3  but my
> experience reveals that there is.  

The Version 3 software is much faster than Version 2.   Which
may account for the differents.

I have the same problem but it not so simple to solve because
our vax autodialer is a Racal-Vadic 3451.  Hence when uucp
uses the Racal-Vadic it can not change the VO to DA switch.

Sometime when uucico runs it gets hung.  It only uses about
2 or 3 seconds of cpu time.  It leaves the lock files and
doesn't reset the modem.  Has anyone else had this problem.


-- 
	Darryl Wagoner
	Raytheon Co.; Portsmouth RI; (401)-847-8000 x4089

best path             {allegra|gatech|mirror|raybed2}  ---------\
next best             {linus|ihnp4|pyrbos} ---------------------->!rayssd!dpw
if all else fails     {brunix|cci632} -------------------------/