Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!think!mit-eddie!genrad!decvax!dartvax!uvm-gen!punia
From: punia@uvm-gen.UUCP (David T. Punia)
Newsgroups: net.micro.att
Subject: Alternates graphics bds for 6300 (request)
Message-ID: <331@uvm-gen.UUCP>
Date: Thu, 26-Jun-86 22:36:43 EDT
Article-I.D.: uvm-gen.331
Posted: Thu Jun 26 22:36:43 1986
Date-Received: Sun, 29-Jun-86 06:52:36 EDT
Organization: University of Vermont (780a)
Lines: 20


	Has anybody out there successfully installed a non-AT&T graphics
board in a 6300?  ATTIS gave us a "fix" to disable the 6300's own graphics
circuitry, but it failed to boot with the Quadram (tm) EGA+ board we'd like
to use.  We used the 1.21 ROM's & tried every switch setting that may have made
a difference.  Any successes out there?  All I'm really after is a standard
video signal out of the machine, nothing fancy.

Mail responses will be summarized in a few weeks, after vacation!


-- 

David T. Punia, Dept. of Computer Science & Electrical Engineering
The University of Vermont, Burlington, VT   05405-0156  
802-656-3330

USENET --> ....!decvax!dartvax!uvm-gen!punia
CSNET ---> punia@uvm  
OTHERNETS ----> punia%uvm@csnet-relay