Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!sbcs!helm!lenny
From: lenny@helm.UUCP (Lenny Tropiano)
Newsgroups: net.video,net.micro.att,net.graphics
Subject: Video Output on a AT&T PC6300
Message-ID: <527@helm.UUCP>
Date: Wed, 2-Jul-86 15:23:17 EDT
Article-I.D.: helm.527
Posted: Wed Jul  2 15:23:17 1986
Date-Received: Fri, 4-Jul-86 00:48:26 EDT
Organization: Helm, Pub-Access Eunichs, Farmingdale , NY(LI)
Lines: 28
Keywords: video, AT&T, vcr, PC6300
Xref: linus net.video:2755 net.micro.att:1362 net.graphics:1692


			H E L P!

We are developing software for AT&T series computers.  At this time
we want to make a demonstration video tape ("how-to-do") but are running
into some stumpling blocks.  Video cameras don't have a high enough 
resolution to record from a monitor.  Is it possible to record directly
from a AT&T system directly (without camera) to VCR?

We had an idea to use the "9-pin" output from our PC6300.  Unfortunately
we do not have the technical specs for what that port sends out.  Does
anyone have such a pinout diagram?  Does it in fact actually give us
video output?  In theory we should be able to make a cable from 9-pin
male to RCA jack, right?


Please respond to either:		..philabs!sbcs!helm!lenny
			-or- 
					American LP Systems, Inc.
					1777 Veterans Highway
					Islandia, New York  11722
			-or-
					(516) 582-5525 (call collect if
						necessary)

				Thank you,

					Lenny Tropiano