Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!princeton!caip!brl-adm!brl-smoke!T.MOORE%DEEP-THOUGHT@mit-eddie.ARPA
From: T.MOORE%DEEP-THOUGHT@mit-eddie.ARPA (Andrew Moore)
Newsgroups: net.micro.cpm
Subject: BYE...
Message-ID: <1263@brl-smoke.ARPA>
Date: Tue, 10-Jun-86 17:01:47 EDT
Article-I.D.: brl-smok.1263
Posted: Tue Jun 10 17:01:47 1986
Date-Received: Fri, 20-Jun-86 04:26:32 EDT
Sender: news@brl-smoke.ARPA
Lines: 33


Keith -- please forward to RCPM-Sysops if possible

------

   For quite a while I've been trying to find a version of BYE which would
run on my Apple II+.  Recently someone suggested that I try BYE507 and
B5AS-1.INS.  I did.  It didn't work -- just froze up right after loading
(didn't give the BYE messages or anything, just froze after loading from
disk).

   I HAVE BEEN DOING THIS FOR NEARLY THREE YEARS NOW . . . 
                                     ^^^^^ ^^^^^


   Surely there must be a II+ version around, otherwise what's the use of the
versions that are currently being circulated?  My configuration is as follows:

   Apple II+, 64K
   MicroSoft Softcard
   Apple CP/M 2.23
   Super Serial Card with USR 2400 modem

   No version of BYE has worked for me in the three years I've been searching.
Yes, I change the CCP length to 9 for the non-standard CCP length, etc.  No
luck; nothing but frustration.  PLEASE -- if anyone can help, if anyone knows
of an RCP/M running BYE under this configuration, contact me.

-drew
 arpa: MOORE%MIT-EECS@MIT-MC.ARPA
 uucp: ...mit-eddie!moore
   us: Box 121, North Quincy, MA  02171
-------