Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!brl-adm!brl-smoke!smoke!tikal!slovax!ira@UW-BEAVER.ARPA
From: ira@UW-BEAVER.ARPA
Newsgroups: net.micro.cpm
Subject: Kaypro-II Video Problem Solved
Message-ID: <1816@brl-smoke.ARPA>
Date: Mon, 30-Jun-86 09:05:47 EDT
Article-I.D.: brl-smok.1816
Posted: Mon Jun 30 09:05:47 1986
Date-Received: Tue, 1-Jul-86 03:21:38 EDT
Sender: news@brl-smoke.ARPA
Lines: 17

Earlier I posted an item describing a problem where my Kaypro-II video 
would cease horizontal scanning.  I "played" a bit with the components 
and connectors when this conditioned occurred and found that there is a 
4 conductor connector towards the front left of the machine that had 
the solder on the pin on the board which connects to the blue wire 
neatly "eaten away."  Resoldering the pin seemed to fix the problem. 
Luckily, the pin was accessible through one of the vent holes on the 
bottom of the Kaypro so I didn't have to disassemble the unit.

Hope this helps someone else.

 Ira Chayut
 R & D Associates
 3625 Perkins Lane, SW
 Tacoma, WA 98499
 (206) 581-1322
 ....uw-beaver!tikal!slovax!ira