Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!brl-adm!brl-smoke!smoke!W8SDZ@SIMTEL20.ARPA
From: W8SDZ@SIMTEL20.ARPA (Keith Petersen)
Newsgroups: net.micro.cpm
Subject: xmodem on cpm
Message-ID: <1821@brl-smoke.ARPA>
Date: Mon, 30-Jun-86 09:12:37 EDT
Article-I.D.: brl-smok.1821
Posted: Mon Jun 30 09:12:37 1986
Date-Received: Tue, 1-Jul-86 03:22:50 EDT
Sender: news@brl-smoke.ARPA
Lines: 28

>Does anyone know of an xmodem program for cpm that runs on the console 
>port. It seems to me that the bbs xmodems are written to interface with 
>bye in a bbs enviroment. I am using my pc as the console terminal on my 
>cpm system. I would like to xmodem files between them without needing 
>another terminal or lots of cable switching. This would be like umodem 
>on unix.

Yes, XMODEM is what you want.  It does not require the BYE program.
It's available from SIMTEL20 as:

Filename			Type	 Bytes	 CRC

Directory PD:<CPM.RCPM>
XMDM124.LBR.1			BINARY	113792  4437H

If you are unable to access SIMTEL20 because of network restrictions
it's also available on my RCP/M Royal Oak (MI) which may be accessed
at 300 bps (Bell 103a), 1200 bps (Bell 212a), or 2400 bps (V.22 bis).
The telephone number is (313) 759-6569.  It can also be found on the
CP/M RoundTable on General Electric Information Services' GEnie.

You'll need a hardware overlay, which you'll find in XMDM-OVL.LBR.
Chose the appropriate one for your computer's I/O port arrangement.

--Keith Petersen
Arpa:   W8SDZ@SIMTEL20.ARPA
GEnie Mail: W8SDZ
uucp:   {ihnp4,allegra,cmcl2,dual,decvax,mcnc,mcvax,vax135}!seismo!w8sdz