Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!ittatc!dcdwest!sdcsvax!sdcrdcf!ucla-cs!matt
From: matt@ucla-cs.ARPA (Matthew J Weinstein)
Newsgroups: net.micro.mac
Subject: Re: MacDraw upgrade wishes
Message-ID: <14650@ucla-cs.ARPA>
Date: Sat, 31-May-86 00:03:38 EDT
Article-I.D.: ucla-cs.14650
Posted: Sat May 31 00:03:38 1986
Date-Received: Mon, 2-Jun-86 16:33:20 EDT
References: <113@fcstools.UUCP> <3503@reed.UUCP> <3366@sdcc3.UUCP>
Organization: UCLA CS Department
Lines: 5


To get an arc of an arbitrary number of degrees in MacDraw, first draw a
quarter-circle of the appropriate radius, then use the RESHAPE menu command 
(command-R).  SHOW SIZE shows the number of degrees.  You can rotate from 
either endpoint.