Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!lll-crg!lll-lcc!dual!ptsfa!ptsfb!che
From: che@ptsfb.UUCP (Mitch Che)
Newsgroups: net.micro.mac
Subject: Getting at Laserprep (finally!)
Message-ID: <501@ptsfb.UUCP>
Date: Sun, 29-Jun-86 18:56:29 EDT
Article-I.D.: ptsfb.501
Posted: Sun Jun 29 18:56:29 1986
Date-Received: Mon, 30-Jun-86 06:12:10 EDT
Organization: Pacific * Bell, San Francisco
Lines: 17

Thanks to all who responded re: getting at the Laserprep file.  The
bottom line is that a) pretending you have AppleTalk connected, b) choosing
the Laserwriter and c) using cmd-K at the Laserwriter dialog box definitely
works, BUT only with the newest System folder files (3.1, 3.2), not 3.0.

Procedures that don't work with "standard" versions of the System files
are going to be ongoing problems with so many versions.  We can all try
and reduce this problem by posting version numbers of the System, Finder,
etc. you happen to be using for a new whiz-bang effect...

Anyway, at last I'm the proud owner of the Laserprep 3.1 text.  Yeehaa!
Thanks again, especially to those who mailed suggestions...
-- 
Mitch Che	Pacific Bell			"No matter what the salesman
---------------------------------------		says, never buy a used car
disclaimer, disclaimer, disclaimer, too		lying on its side..."
(415) 823-2438 uucp:{ihnp4,dual}!ptsfa!ptsfb!che