Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!lll-crg!styx!nike!cad!ucbvax!sdcsvax!gould9!rob
From: rob@gould9.UUCP (rob)
Newsgroups: net.micro.pc
Subject: Re: Compaq dies after format-anyone else?
Message-ID: <590@gould9.UUCP>
Date: Tue, 3-Jun-86 11:31:56 EDT
Article-I.D.: gould9.590
Posted: Tue Jun  3 11:31:56 1986
Date-Received: Thu, 5-Jun-86 08:39:52 EDT
References: <1613@ecsvax.UUCP>
Distribution: net
Organization: Gould CSD, San Diego
Lines: 39
Summary: same problem here

In article <1613@ecsvax.UUCP>, cjl@ecsvax.UUCP (Charles Lord) writes:
> 
> 
> I added a hard disk to my Deskpro at work and now have a new
> problem: after a floppy disk format, the computer hangs up
> completely.  I assume it is the incompatibility of the disk
> controller (hard disk) with the Compaq BIOS but everything else
> works great and has for a year- as long as you don't format 
> floppies...
> 
> Any clues/common experiences?
> 
> Charles Lord
> Triangle R&D Corp.
> RTP,NC
> cjl@ecsvax.UUCP



I had the same problem and solved it by moving the floppy 
disc controller card and the hard disc card to different slots
It is apparently a board seating problem with the 60 pin 
connectors.
I do not have the problem any more but beware of other 
pcb's not acting correctly after the board swapping is done..


-- 
                                 
 

              
                                      
Rob Gwaltney     San Diego,CA

    
{cbosgd,ihnp4,sdcsvax,ucla-cs}!gould9!rob 
{seismo!s3sun,hplabs!hp-sdd,sun!suntan}!gould9!rob 
rob%gould9.uucp@NOSC.ARPA