Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!lll-crg!styx!nike!cad!ucbvax!sdcsvax!gould9!rob
From: rob@gould9.UUCP (rob)
Newsgroups: net.micro.pc
Subject: Re: Multiple Winchesters On A Western Di
Message-ID: <591@gould9.UUCP>
Date: Tue, 3-Jun-86 11:39:43 EDT
Article-I.D.: gould9.591
Posted: Tue Jun  3 11:39:43 1986
Date-Received: Thu, 5-Jun-86 08:41:25 EDT
References: <804@kontron.UUCP> <1500056@iuvax.UUCP>
Organization: Gould CSD, San Diego
Lines: 36
Summary: rom upgrade

In article <1500056@iuvax.UUCP>, access@iuvax.UUCP writes:
> 
>   I think it depends on the ROM that came with the card.  I have a
> WD controller on which I am running 2 20 meg drives.  The 34 pin
> cable has to be replaced with a two connector cable or be fixed with
> a 34 pin connector from Radio Shack or similar store.  J2 should be
> connected to the second drive.  That's about as far as I can recall
> at the moment.  Someone else please take it from here!
> 
> Bob  access@iubacs (bitnet)  access@iuvax (uucp)



The card I have had an upgraded rom of 3.92 it is an everex
card and the book says any two drives can be connected to it
I don't have any experience with the two drive config but
I do knoew someone who does maybe he can help you.
His name is sid and he can be reached at 619-464-7468.


Hope this helps you out...

					Rob @GOULD9

-- 
                                 
 

              
                                      
Rob Gwaltney     San Diego,CA

    
{cbosgd,ihnp4,sdcsvax,ucla-cs}!gould9!rob 
{seismo!s3sun,hplabs!hp-sdd,sun!suntan}!gould9!rob 
rob%gould9.uucp@NOSC.ARPA