Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!convex!techsup!johnm
From: johnm@techsup
Newsgroups: net.micro.trs-80
Subject: Re: Orphaned Response
Message-ID: <-1677875@techsup>
Date: Wed, 28-May-86 22:45:00 EDT
Article-I.D.: techsup.-1677875
Posted: Wed May 28 22:45:00 1986
Date-Received: Sun, 1-Jun-86 10:12:20 EDT
References: <103@vsedev.UUCP>
Lines: 11
Nf-ID: #R:vsedev.UUCP:103:techsup:-1677875:000:402
Nf-From: techsup!johnm    May 28 21:45:00 1986


 there shouldn't be any problem with a secondary on the 3000

 there is a jumper...depending on the drive you've got.
look on the drive ( the one you're using for the secondary )
there should be a jumper,possibly labeled 1..n,set this to position (2)
also be sure you run the "setup" program to configure the system.
this may all seem trivial but it should be all that's required.

good luck........