Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!brl-adm!brl-smoke!smoke!trwrb!ipac3!ecjpl@ucbvax.berkeley.edu
From: ecjpl@ucbvax.berkeley.edu
Newsgroups: net.unix
Subject: SCSI device driver
Message-ID: <1778@brl-smoke.ARPA>
Date: Fri, 27-Jun-86 18:44:26 EDT
Article-I.D.: brl-smok.1778
Posted: Fri Jun 27 18:44:26 1986
Date-Received: Mon, 30-Jun-86 05:31:50 EDT
Sender: news@brl-smoke.ARPA
Lines: 25


Michael F. Skeate
Software Development
IPAC/Caltech

    My partner and I are in the process of interfacing an OSI 1200 Laserdrive
with a Jupiter 12 workstation.  Our system runs 4.2b BSD Unix, and has a DEC
QBUS on the backplane.
    The Laserdrive operates on the SCSI protocol, and utilizes a standard group
0 command set.  To complete the interface, we need to write an SCSI device
driver.  Since we are novices in this field (we are Harvey Mudd engineering
students working on a special project) we need to study several SCSI type
drivers. 
    We would greatly appreciate if anyone could send us a working SCSI driver
that we may study, or if anyone could offer some suggestions on how to complete
this task.
    Thanks a alot!

Note: my true mailing address      ucbvax!trwrb!csla34!ipac3!ecjpl
                           or      ucbvax!cit-vax!ipac3!ecjpl
                           or      Michael F. Skeate
                                   m.s. 100-22
                                   Caltech
                                   Pasadena, CA  91125
                                   (818) 584-2925