Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!decvax!decwrl!ucbvax!USC-ISIB.ARPA!Info-IBMPC From: Info-IBMPC@USC-ISIB.ARPA.UUCP Newsgroups: mod.computers.ibm-pc Subject: Info-IBMPC Digest V5 #62 Message-ID: <8606200946.AA21898@ucbvax.Berkeley.EDU> Date: Fri, 20-Jun-86 03:42:42 EDT Article-I.D.: ucbvax.8606200946.AA21898 Posted: Fri Jun 20 03:42:42 1986 Date-Received: Sat, 21-Jun-86 03:54:39 EDT Sender: daemon@ucbvax.BERKELEY.EDU Reply-To: INFO-IBMPC@USC-ISIB.ARPA Organization: The ARPA Internet Lines: 809 Approved: info-ibmpc@usc-isib.arpa Info-IBMPC Digest Friday, June 20, 1986 Volume 5 : Issue 62 This Week's Editor: Richard Nelson Today's Topics: MMDF II for the IBM PC SCO Xenix V. Microsoft MASM V4, IBM Graphics Toolkit Incompatibility Hollerith Strings in MS FORTRAN Screenwriter's WP Software (2 msgs) NEC (and Other) Serial Cable Hard Disks for Portable/Hard Cards (2 msgs) Data Flow Diagramer with a Dictionary Interface Today's Problems/Queries: MS FORTRAN 3.31 and Memory Resident Software Problem Xebec Floppy/Hard Disk Controller Problems Tall Tree JRAM-AT and Xenix(tm) 1.0 Problem ASUKA Keyboard Problem SixPakPremium Card and DeskView Problem IBM Portable Display Query Z158 Echo Patch in command.com Query Project Planning Software Query 3-D Software Query Determining Active Program Query Radio Shack-PC Computer/Computer Disk Read Query Power-On Memory Test Bypass Query Calling MS C from Assembler Query C Beautifier Wanted Venix Operating System Query NEC V20 Software Query Programming the EGA Query Zenith 248 with PC Networking Query Amdek 310A and TTL Monitors Query Alternatives to IBM Diagnostics Kits Query EMS Board on PC's Ltd Clone Query ---------------------------------------------------------------------- To: info-ibmpc@usc-isib.ARPA, info-micro@brl.ARPA Subject: MMDF II for the IBM PC SCO Xenix V. Date: Sun, 15 Jun 86 18:26:19 -0400 From: Dave Farber This is intended as an invitation to help us field beta test a new port of the MMDF II message transport system that has just come up under SCO Xenix V for the IBM AT and PCs. It is the latest version of MMDF and supports all the transformation etc features. It also comes with a msg message agent. Right now we have the uucp channel (as well as local etc) operational as well as the equivalent on our 4.2 vaxens. Soon the Phonenet channel will also be operational. Again we are interested in Beta testers. The porting effort was done first by Steve Caine of CFG Inc for the Altos and then Chuck Cranor of the University of Delaware for the SCO product. Please send mail to either cranor@louie.udel.edu or me. Dave ------------------------------ Date: Mon, 16 Jun 86 15:39:13 edt From: jcm@ORNL-MSR.ARPA (James A. Mullens) To: info-ibmpc@usc-isib Subject: Microsoft MASM V4, IBM Graphics Toolkit Incompatibility This is a note about an incompatibility between macro assemblers, and a bug fix for programmers using the Microsoft macro assembler version 4 with IBM's Graphics Development Toolkit (VDI package). I recently wrote an assembly language program which calls VDI package routines. The program did not work correctly when assembled with Microsoft's MASM version 4, but did work correctly when assembled with IBM's (slow) MASM V 2. (Can you say "I bet that took a while to discover"? I thought you could!). I called the VDI package authors (GSS), and they volunteered to look at the problem if I sent them a disk. In about a week I got the disk and this reply back. Date: 06/06/86 From: Randy Salo GSS Product Support Manager Apparently the Microsoft Macro Assembler Version 4.00 contains some increased restrictions about how the ASSUME directive is handled in conjunction with the EXTRN directive. Due to the way the GSS*VDI Macro Assembler Binding macro file MACVDI.MAC is constructed, the 4.00 Macro Assembler loses track of the proper segments in which binding code belongs. While other versions of the Macro Assembler allow MACVDI.MAC to be constructed the way it is, the 4.00 version does not. In order to fix this problem, the macro include file MACVDI.MAC must be modified to explicitly override any ASSUME directives a macro assembler application may contain. The easiest way to do this is to define a new macro called V_C that looks like the following: V_C Macro Routine Call VDI:Routine Endm This macro definition must go at the top of the MACVDI.MAC include file. The next thing that must be done is all CALL statements in the MACVDI.MAC include file must be changed to invoke the V_C macro. For example, there is a call in MACVDI.MAC that looks like the following: CALL v_opnwk It must be changed to appear as follows: V_C v_opnwk It should be noted that EVERY CALL in the file must be modified as in the above example. The above fix will work with your IBM version of the assembler as well. I would like to offer a public "thank you" to GSS from a customer who has no other interest in the company. ------------------------------ Date: Mon, 16 Jun 86 08:48:18 EDT From: Bernard_Tiffany%UMich-MTS.Mailnet@MIT-MULTICS.ARPA Subject: Hollerith Strings in MS FORTRAN [From V5 #61 and Evan Bauman's mention of MS FORTRAN's problem with CALLs using Hollerith strings instead of quoted strings. MS FORTRAN follows a subset of the F77 standard. -rn] The FORTRAN 77 standard allows Hollerith strings only in the FORMAT statements. They are not true character constants. True character constants should be embedded within quotes. ------------------------------ Date: Mon, 16 Jun 86 20:45:29 PDT From: larry@Jpl-VLSI.ARPA Subject: Screenwriter's WP Software: Scriptor To: info-ibmpc@isib.arpa The only commercial product I know of is Scriptor from Screenplay Systems, (818) 843-6557, in Burbank, California. It accepts files written with several word processors (including MS Word, Wordstar, and New Word). They advise against use with several word processors that use a lot of format codes inserted inline in the ASCII text. It produces a screenplay that follows a number of rules, such as "don't do page breaks between character names and dialogue for that character." Apparently it does other actions too, some only on request, such as repaginate and automatically number scenes a table of contents listing pages, scenes, scene headings, and scene lengths. Cost is $295 and runs on MS-DOS, CP/M 80 and 86, and will work with a wide variety of printers. I have not used this product and can't give you any recommendations on it. I use Wordstar myself and insert phony dot commands (such as ..SCENE) which I later replace with the Wordstar Ctrl-QA command. Larry @ jpl-vlsi.arpa ------------------------------ Date: Tue, 17 Jun 86 13:17 EDT From: BAGLEY%temple.csnet@CSNET-RELAY.ARPA To: info-ibmpc@USC-ISIB.ARPA Subject: Scriptwriter's Wordprocessor: AVWord > An associate of mine is looking for a word processor designed especially > for screen-writers. Send any mail to BROWNINGBD@VTVAX5.BITNET > Thanks in advance, > > --Walter > c/o Barry D. Browning > > [There's a program called Scriptor, but I don't know anything more about > it than the name. -rag] How about ... AVWord - 2 independent 38 col work areas on screen. Easy jumps from one to the other. Blocking, deleting, adding, moving in one column without disturbuing adjacent column lines. Prints what you see in single, double, triple, space with headers and footers if needed. $125 list. I've used it myself for about half an hour and it performs pretty well. I am not a scriptwriter, however, so I don't use it myself. I know the guy who wrote it and I think that it is a worthwhile product. (I don't receive any favors for telling other people about his software). It is available from: Silverwood Software 3401 Market St. Philadelphia, PA 19104 tel: 215-387-7979 Doug Bagley (Bagley%temple.csnet@csnet-relay) ------------------------------ Date: Mon, 16 Jun 86 10:26 PDT From: GeorgeBurkitt.ES@Xerox.COM Subject: NEC (and Other) Serial Cable To: INFO-IBMPC@USC-ISIB.ARPA cc: GeorgeBurkitt.ES@Xerox.COM >I got the following from a book titled, 1 --- 1 >"RS_232 Made Easy: Connecting Computers, C 2 --> 3 P >"Printers, Terminals and Modems" by Martin O 3 <-- 2 R >>D. Seyer, Prentice-Hall, 1984. M 4 --> 8 I The easiest solution I've found to RS-232 is the Black Box series of "Easy-Connect Cable Adapters". These are standardizing modules you mount permanently on each RS-232 connector; you then interconnect with a telephone-like quick-connect RJ-12 plugs/cable. There are custom modules for almost all printers and modems, computers, plotters, video terminals etc. (Only 6 modules are needed for the above !. The only drawback I see is that the cables are unshielded....they're just like the new telephone cords, only 6 wires instead of 4. If you need to hook up your printer to a different source, you just unplug the phone cord and plug it in the other computer. Costs $12.95 per module plus a few bucks for the cable. No more fussing with the hardware, you *know* it's OK; you can get on with debugging the protocol. ------------------------------ Date: Mon, 16 Jun 86 11:20 PDT From: GeorgeBurkitt.ES@Xerox.COM Subject: Hard Disks for Portable To: INFO-IBMPC@USC-ISIB.ARPA cc: GeorgeBurkitt.ES@Xerox.COM >a half-height hard disk which is shock-resistant and specifically >designed for use in the Portable? In general, the 3.5" hard disks are more shock-resistant than the larger drives, and can be adapted to the 1/2 height applications with simple brackets (most are available with these brackets from the manufacturer). LaPine Technology, Rodime Inc, Peripheral Technology Inc., Microscience International Corp. all brag about shock and vibration resistance, obviously looking for portable business. In the 1/2 high bracket, they are probably even more resistant to damage. to damage. > Subject: PLUS Hardcard Another company advertising a Hard Card equivalent is Portable Solutions (Backpac International Corp) about whom I know next to nothing. They have an office in Austin Texas. ------------------------------ Date: Mon, 16 Jun 1986 13:48 CDT From: Shawn L. Morrissey Subject: The Hardcards To: I recently found quite a good deal on a 20M hardcard from PC Connection. The card itself takes up 1 1/2 slots. The list price is $489 until the end of June. Their ads can be found in magazines such as PC Week, and PC World. I have no affiliation with PC Connection. Good luck if you get one. Shawn Morrissey (Gabriel@TAMCBA) ------------------------------ Date: Mon, 16 Jun 86 21:46:41 PDT From: larry@Jpl-VLSI.ARPA Subject: Data Flow Diagramer with a Dictionary Interface To: info-ibmpc@isib.arpa There are perhaps a dozen data-flow diagramers incorporating a dictionary that you can buy off the shelf. All tend to be pretty expensive unless you're doing a medium-to-large project, in which case they're well worth the $6000-$8000 for the more elaborate. I've done an extensive comparison of three (Excelerator, DesignAid/CASE 2000, and Yourdon SW Engineers Workbench). Currently the best is Excelerator for the PC/AT environment (on the XT they're all too slow), but it has a number of features that could be improved. Other products in the same price class that I've only seen in demos includes Pro-Kit Analyst from McDonnell-Douglas. All of them allow you to draw control-structure and data-structure diagrams as well as data-flow diagrams. DesignAid, however, can only do consistency/ completeness checking on data-flow diagrams and draws them using character and not bit-map graphics, so they look pretty crude. The Workbench is now only a beta-test version, but has some useful features, such as the ability to draw finite-state diagrams and smoothly (but SLOWLY) zoom diagrams from very small to very large windows onto the diagrams. The next cheaper (at $1000) is PCSA (PC Structured Analysis tool) from StructSoft in Parsippany, New Jersey, (201) 292-9889. It only does data-flow diagrams and the dictionary contains only data items (data-flows and data- stores) and not process items (unlike the three above). Thus there is no ability to cross-reference data against process, for instance. It is fast enough to run on an XT, however, and produces fairly attractive diagrams using pop-up menus, so it's not all that difficult to learn and use. The next cheapest would be one of the cheaper CAD/CAM drawing packages or MacPaint clones, but they don't have a dictionary capability. Sorry, but that's the current state-of-the-art in structured-analysis tools. Larry @ jpl-vlsi.arpa ------------------------------ Date: Fri, 20 Jun 86 00:05 EST To: info-ibmpc@usc-isib.arpa From: GKN3M2%IRISHMVS.BITNET@WISCVM.WISC.EDU Subject: MS FORTRAN 3.31 and Memory Resident Software Problem A beleaguered MS Fortran user has the following problem. Is there anyone who knows the fix to this bug? I recently began using MS current release (3.31) of their fortran compiler and ran into an interesting, and annoying 'bug'. It seems that most terminate stay resident programs, including SIDEKICK and SP ,a t r print spooler, will not function correctly when invoked when executing programs compiled w/3.31. When the same programs are compiled w/rel. 3.2, the t r programs work fine. Symptoms are: SIDEKICK - 3 quick tones generated by speaker SP- program writes directly to printer instead of to print file. Print file contains most of the binary executable code of SP program! Any help would be greatly appreciated. Max Robin All replies will be forwarded to Max ASAP. Thanks. Evan Bauman GKN3M2%IRISHMVS.BITNET@WISCVM.WISC.EDU ------------------------------ Date: Sun, 15 Jun 86 23:04:01 EDT From: Stev Knowles To: INFO-IBMPC@usc-isib.ARPA Subject: Xebec Floppy/Hard Disk Controller Problems It took several weeks to get a floppy/hard disk controller (a Xebec), and it came without docs. So it took another 2 weeks to get docs. They finally get the docs, and i find that there is no entry in the drive table for a seagate 225 (halfheight, 20meg.), which is becoming a very popular drive. They told me it would take about 1 to 1 1/2 weeks to get a new rom burned with this entry in the rom table. Questions: are there a fair number of disks in this table?(when i buy the second hard disk, will i be restricted in the ones i can buy?) how hard are these controllers to find? i have heard that they are very good, but i must say i am not too impressed so far. is there a better place to be buying this? i am interested in some software too (i am trying to get this locally(washington dc.)) thanx for your time. stev stev@SEISMO.CSS.GOV ------------------------------ Date: Mon, 16 Jun 86 02:26:59 PDT From: maddox@renoir.berkeley.edu (William Maddox) To: info-ibmpc@usc-isib.arpa Subject: Tall Tree JRAM-AT and Xenix(tm) 1.0 Problem I recently purchased a Tall Tree Systems JRAM-AT memory expansion for my IBM AT. According to the manual, when configured in its so-called "mode 1", it functions "exactly like an ordinary IBM expansion board." I carelessly assumed that this was true; How could anyone possibly screw up something as straightforward as a memory board? Well, they did. When using this board, Xenix 1.0 nearly always panic halts with a parity error during the boot sequence. The IBM diagnostics show no problems. I contacted Mr. Troy Stone at Tall Tree technical support who informed me that they had seen this problem before, did not know what caused it, and said to tape over one of the pins on the edge connector. What he had in fact advised me to do was to disable parity error detection entirely. I insisted that this was not an acceptable solution, and that I wanted a real fix. To his credit, he offered to refund my money on the board, provided that I had purchased it directly from Tall Tree Systems. Unfortunately, I had purchased my JRAM-AT through a dealer as a special-order item. He agreed to send me a schematic when I inquired about technical details. Despite a claim that TTS was looking into the cause of the problem, when I called back a few weeks later, Mr. Stone offered only the same advice as before, and I got the distinct impression that TTS was not particularly interested in finding the cause of the problem, much less providing its customers with a hardware or software patch. I find this lack of support rather disappointing, as the JRAM-AT, if it were compatible as claimed, has much to offer the Xenix user. The situation is typical, however, of problems that I, as a Xenix user, have experienced when dealing with DOS-oriented companies, whose definition of IBM-compatible often seems to be "runs Lotus 1-2-3 and Sidekick." I would be interested in hearing from anyone who has successfully used a Tall Tree Systems JRAM-AT with any version of Unix(R) on an IBM-AT, or can shed some light on the cause of this problem. Bill Maddox ARPA: maddox@renoir.berkeley.edu UUCP: ucbvax!renoir!maddox BELL: 415-849-0462 ------------------------------ Date: 17 Jun 86 04:50 GMT From: ghicks @ KOREA-EMH Subject: ASUKA Keyboard Problem To: INFO-IBMPC @ USC-ISIB I have an ASUKA 105 keyboard that has developed an annoying problem: to wit: some of the keys act like they have "KEYBOUNCE". That is, I type one character, hold the key down long enough to get one character but get two characters. No, this is not the auto-repeat function, but a real keybounce. I understand that the keyboard is a thin film type of keyboarrd (see it did the bounce there!!). can it be repaired. Is there some type of software that can be run on the keyboard to stop this? Is there some sort of hardware change I can make to fix it? What?? It really is annoying! Gregory Hicks GHICKS@KOREA-EMH JUSMAG-JP@KOREA-EMH ------------------------------ To: info-ibmpc@usc-isib.ARPA Subject: SixPakPremium Card and DeskView Problem Date: Thu, 19 Jun 86 16:06:42 -0500 From: Terry Woodhouse Those of you who are getting the AST SixPakPremium card with the bundled DESQview software might be interested in the following. A friend of mine recently upgraded his portable with this combination, hoping like the rest of us to increase his ability to run multiple programs. Unfortunately, after he finished the automatic install procedure, the DESQview memory status program reported only 48K expanded memory available instead of the 560K or so that was there. Checking the CONFIG.SYS file revealed that the extended and expanded memory drivers were there as required. A call to AST yielded the advice to send the bad copy of DESQview back for exchange. In fact, the copy of DESQview was not bad at all. Some further experimentation revealed that the REX.SYS driver for extended memory somehow caused DESQview to treat all that extra memory as extended rather than expanded memory, even though the driver parameters were set up for only 20K or so of extended memory to handle the print spooler chores. Apparently DESQview couldn't recognize both the extended and expanded memory. Removing the REX.SYS driver from the config file fixed the problem. Two points seem pertinent here: first, the documentation apparently didn't include any hint of the impending problem (I haven't read it myself, but I know my friend can read), and second, just because some software is bundled with a hardware board, don't assume all the interactions between the two are well understood by tech support. CAVEAT UPGRADER! If anyone else has any additional insights on this, such as how to get DESQview to recognize both types of memory, your opinions will be cheerfully received. Terry Woodhouse tjw@mitre-bedford ------------------------------ Date: Mon 16 Jun 86 08:19:10-PDT From: Tony Brand Subject: IBM Portable Display Query To: info-ibmpc@USC-ISIB.ARPA I've a hacked up IBM PC portable. It works well even though little of it apart from the motherboard, CRT and power supply are the original IBM. Anyway, the composite display is lousy and unreadable when certain colors are shown. Is there anyone out there who has put a 9" color display into a portable? How about a software fix to make the display more readable when multiple colors are shown. There must be a solution other than using an external RGB monitor, which is what I'm doing now. Please reply to me personally... I'll post the solutions if there are any. Tony Brand, Trenton State College Voice : (609)-771-3013 Data : (609)-771-2829 (bulletin board) ArpaNet: brand@sumex-aim.arpa ------------------------------ From: reintom@ROCKEFELLER (Tom Reingold) Date: 16 Jun 1986 1139-EDT (Monday) To: info-ibmpc@usc-isib Subject: Z158 Echo Patch in command.com Query I use a Zenith PC, model 158. It came with what they call Microsoft DOS version 3. When I type "ver" the output is: IO.SYS Version 3.05 MS-DOS Version 3.10 I set out to do the patch to set echo to be off as a default in batch files and found different values than expected based on how to do it for IBM's PC-DOS. Has anyone got the trick to do this for whatever version I have? Better yet, does anyone have an *algorithm* for finding where the echo setting is found in COMMAND.COM? Any help would be appreciated. Tom Reingold Rockefeller University reintom@rockefeller.arpa ------------------------------ Date: 16 Jun 1986 10:10:21 PDT Subject: Project Planning Software Query From: Jeff La Coss To: info-ibmpc@USC-ISIB.ARPA cc: JLACOSS@USC-ISIB.ARPA I've seen ads for a gazillion different project scheduling software packages. Prices seem to range from $25 to $1000. Anybody out there have any experience with such beasties? I'm primarily interested in packages that cost less than $300. Jeff ------------------------------ Date: Mon, 16 Jun 86 14:20:07 edt From: skip@mitre-bedford.ARPA (George S. Guild) To: info-ibmpc@usc-isib.ARPA Subject: 3-D Software Query Cc: skip@mitre-bedford.ARPA I am looking for a decent three dimensional graphics program which runs under PC DOS (and/or WINDOWS) which is inexpensive and command or mouse driven like Micrografx Windows DRAW or Microsoft PAINT. It doesn't have to be elaborate or expensive like AutoCAD or similar kilobuck programs but should support at least the following: 1. Plotter support (HP7470A). 2. 3-D data input with easy user interface. 3. Screen display (desire EGA support but not required). 4. Hidden line removal. 5. Object translation/rotation. I will summarize the response(s) I receive. Thanks in advance. ------------------------------ Date: Monday, 16 Jun 1986 13:00:22-PDT From: watson%akov04.DEC@decwrl.DEC.COM To: info-ibmpc@usc-isib.ARPA Subject: Determining Active Program Query Is there any way for an interrupt level program to find out what program is currently running? I am trying to write a routine to change the screen and border colors and keep them the way I set them. The routine needs to know if COMMAND.COM is running (and therefore it should make sure that the colors are correct) or if an application program is running (in which case the colors should remain as set by the application). Anyone know how to tell what program is active? Thanks in advance. Rick Watson usenet - decwrl!akov04.dec.com!watson arpa - akov04.dec.com!watson@decwrl.arpa uucp - {decvax, ucbvax, allegra}!decwrl!akov04.dec.com!watson enet - akov04::watson ------------------------------ From: reintom@ROCKEFELLER (Tom Reingold) To: ghsvax!pelican!pete@csvax.caltech.edu Date: 16 Jun 1986 1411-EDT (Monday) Subject: Radio Shack-PC Computer/Computer Disk Read Query Cc: info-ibmpc@usc-isib Pete: Have you had any experience reading Radio Shack disks onto an IBM PC? I ask, of course, because you say it is within the hardware's abilities. If you can tell me the name of the software and hardware I need to add, I would appreciate it much. Needless to say, a purely software solution is preferable. Also, do you know anything about how to transfer files between a Model II and a PC? Tom Reingold reintom@rockefeller.arpa [XenoCopy is a software solution for copying about a hundred different disk formats to a PC format. I believe the cost is in the $100-$150 range. -rn] ------------------------------ Date: Tue, 17 Jun 86 08:51 EDT From: MKATZ%UMDD.BITNET@WISCVM.WISC.EDU Subject: Power-On Memory Test Bypass Query To: INFO-IBMPC-REQUEST@USC-ISIB.ARPA I have seen ads for a device (around $50 or $60 I think) which eliminates the lengthy power up memory check in a PC. Does anyone know who makes it ? I think there are a couple of different devices that do this, but I can't seem to find the ads for any of them now that I want to buy one. Please reply directly to me (if possible). Thank you. Manasseh Katz MKATZ@UMDD.BITNET ------------------------------ Date: 17 Jun 1986 06:35:37 PDT Subject: Calling MS C from Assembler Query From: Jerry Mungle To: info-ibmpc@USC-ISIB.ARPA I've got a beginners question. I'm calling a C routine from assembler, and when I enter the C routine, the proggy dies with stack overflow. Making the stack larger is no help. Reading the manual hasn't been much help (I suppose I'm not asking the right questions of the manual). I'll just keep experimenting -- but if someone could provide a pointer, I would be most grateful. Please reply directly to me. Thanks! ....cheers ------------------------------ Date: Tue 17 Jun 1986 10:41:49 EDT From: Subject: C Beautifier Wanted To: info-ibmpc@usc-isib Does anyone have (or know where to get) a good public domain (or failing that *any*) C source code reformatter ("Beautifier"). I am looking for some- thing with source code available or at least enough power to be able to specify the indenting style to use. An option to reformat across lines is also desired. Stuart Scharf ------------------------------ Date: 17 Jun 86 04:49 GMT From: ghicks @ KOREA-EMH Subject: Venix Operating System Query To: INFO-IBMPC @ USC-ISIB My sponsor here is going to purchase the VENIX Operating System. Can anyone tell me anything about that system? Is it useful to run on a PC/XT? AT? What hardware is required? Gregory Hicks GHICKS@KOREA-EMH JUSMAG-JP@KOREA-EMH ------------------------------ Date: Tue, 17 Jun 86 13:58:49 edt From: malpass@ll-vlsi (Don Malpass) Message-Id: <8606171758.AA04198@ll-vlsi.ARPA> To: INFO-HZ100@RADC-TOPS20, info-ibmpc@usc-isib Subject: NEC V20 Software Query Any pointers to software which takes advantage of the features of this critter? I'm using one in my H/Z-100 but until recently didn't know what more it could do for me than speed things up (which it does!). Of particular interest is a $50 CP/M emulator from GFI Electronics in Olathe KS (referenced in Jan/Feb 86 Micro/Systems Journal). If anybody out there has it, or better yet a public domain one: 1. Are there things it won't run? 2. Are there restrictions on the drive-letters allowed in file specifications? My RAMDISK is I:, hard disk partitions are E: through H:, and 8" floppies are C: and D:. Too many programs prevent use of some of those designators. 3. Will it work with RAMDISK? Although I have yet to try RAMLIM with some recently acquired MDISK patches, the emulator I now have does some unpleasant things at times. 4. Have you observed conflicts with "resident" programs like Genie, Sidekick, etc? Finally, (and of least importance), what about assemblers, compilers, or disassemblers that deal with the extended instructions (at risk of increasing incompatibility with the rest of the world)? V-20 special interest or user's groups? don [malpass@LL-sst] ------------------------------ Date: Tuesday, 17 Jun 1986 19:24:25-PDT From: fulton%donner.DEC@decwrl.DEC.COM (Cathy Fulton -- CXO Technical Training) To: info-ibmpc@usc-isib.ARPA, fulton%donner.DEC@decwrl.DEC.COM Subject: Programming the EGA Query I need some good books on programming the IBM (and clone) Enhanced Graphics Adaptor. Suggestions, please? Thanks in advance. - Cathy uucp: ...decvax!decwrl!dec-rhea!dec-comet!fulton ARPA: fulton%comet.DEC@decwrl ------------------------------ Date: Wed, 18 Jun 86 07:25:58 edt From: towen@nswc-wo.ARPA To: info-ibmpc@isib Subject: Zenith 248 with PC Networking Query We are planning on purchasing a quantity of Zenith 248's with memory expansion to 1.5 mbytes, EGA and color monitor, and 2 floppy disk system. We are planning to use these systems on a Novell 2.0 PC Network utilizing either the Ungerman Bass PC Connection (broadband and thinnet versions) or 3-Com Plus thinnet communications media. Has anyone had any negative experiences or lessons learned concerning this configuration? The networking aspect of the configuration is most important for the intended application. Please respond to me directly, and I will post the results to the digest. Thanks in advance for any insights. Tom Owen (towen@nswc-wo) Naval Surface Weapons Center Dahlgren, Virginia 22448 (703) 663-7366 ------------------------------ Date: Wed, 18 Jun 86 15:02:09 ADT From: wdw%ACADIA.BITNET@WISCVM.WISC.EDU (Bill Wilder) Subject: Amdek 310A and TTL Monitors Query To: Info-ibmpc@usc-isib.arpa We have several PC's at work equipped with AMDEK 310A TTL monochrome monitors. When these monitors work they are quite pleasing to look at. Unfortunately they do not seem to be very reliable. Anyone like to offer opinions on TTL monochrome alternatives? ------------------------------ Date: Wed, 18 Jun 86 15:03:55 ADT From: wdw%ACADIA.BITNET@WISCVM.WISC.EDU (Bill Wilder) Subject: Alternatives to IBM Diagnostics Kits Query To: info-ibmpc@usc-isib.arpa We wish to maintain our own PC's and AT's and are considering buying the IBM maintenance kits. These kits come with a typical IBM price and I am wondering if they are worth the money or whether there might be cheaper alternatives. ------------------------------ Date: Thu, 19 Jun 86 12:41 EST To: info-ibmpc@usc-isib.arpa From: GKN3M2%IRISHMVS.BITNET@WISCVM.WISC.EDU Subject: EMS Board on PC's Ltd Clone Query I'm thinking of adding an expanded memory board to my PC clone but I'm a little concerned about compatibility. So here's my request. Is there anyone who owns a PC's Ltd. Turbo PC who has installed an expanded memory board with success. PC's Ltd.'s tech support wasn't much help on this matter when they responded by claiming that they knew of no board which presented any problems, i.e., they haven't tested any but haven't received any complaints I'd also like to here from people who have installed EMS boards in other clones as well. The boards should be fairly popular, especially since generic ones can be had for under $200. Topics of special interest: 1. How do MS Windows and Quarterdeck DesqView perform with EMS boards? 2. Any preferences for EMS (Intel, generic boards) over EEMS (RamPage) boards? 3. Is there really any difference between EMS and EEMS? 4. Are these boards really worth the investment or should I look into a 80286 machine? Respond directly and I'll summarize for the general audience. I'm sure that there are plenty of people like me who are stuck at 640K and are looking for ways out. Thanks in advance. Evan Bauman University of Notre Dame gkn3m2%irishmvs.bitnet@wiscvm.wisc.edu ------------------------------ End of Info-IBMPC Digest ************************ -------