Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!decvax!decwrl!ucbvax!ucscc.UUCP!haynes
From: haynes@ucscc.UUCP.UUCP
Newsgroups: mod.computers.vax
Subject: Two UDA50s on one Unibus
Message-ID: <8607220129.AA09995@ucscc>
Date: Mon, 21-Jul-86 21:29:48 EDT
Article-I.D.: ucscc.8607220129.AA09995
Posted: Mon Jul 21 21:29:48 1986
Date-Received: Wed, 23-Jul-86 01:13:10 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 13
Approved: info-vax@sri-kl.arpa


We have a 780 and are trying to run two UDA50s on one Unibus. (I know we
aren't spozed to, but we need the disk space more than we need the
performance).  The problem is getting it to configure - it doesn't autoconfigure,
and if we run sysgen by hand it then recognizes the controller but not the
drive on it.  For a while it worked, supposedly because we put the uda50
at the 'correct' Unibus address, but this afternoon it stopped working even
tho we didn't change the address.  So it was probably working all along because
of something we did unwittingly, and we don't know what it is.

Jim Haynes
...ucbvax!ucscc!haynes
haynes@ucscc.bitnet