Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utcs!mnetor!seismo!umcp-cs!nbs-amrf!libes
From: libes@nbs-amrf.UUCP
Newsgroups: net.lang.apl
Subject: Re: Converting APL workspaces
Message-ID: <361@nbs-amrf.UUCP>
Date: Wed, 16-Jul-86 11:25:24 EDT
Article-I.D.: nbs-amrf.361
Posted: Wed Jul 16 11:25:24 1986
Date-Received: Thu, 17-Jul-86 19:47:56 EDT
References: <2699@caip.RUTGERS.EDU>
Organization: National Bureau of Standards
Lines: 17

I wrote a WSIS0 implementation when I worked for CCIS at Rutgers.
It's probably lying in a vault somewhere.  In any case, I wrote a
document that included all the source to it.

Very little of it is system-dependent - just things like the system
commands to access the tape drives, and building the WSIS
representation of the atomic vector.  Otherwise, you should be able
to use it.  When I left Rutgers, I dumped some IBM workspaces and
was able to read them on a DEC-10 at Rochester that also had a
WSIS.  I assumed it was DEC's implementation.  But from your
message it sounds not.  Try contacting someone at the UofR comp
center.  I can't help you with Dyalog.

Lee, I never heard of WSIS1.  Could you briefly describe what the
differences between WSIS1 and WSIS0 are?

Don ")314159" Libes {seismo,umcp-cs}!nbs-amrf!libes