Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!caip!cbmvax!bpa!burdvax!psuvax1!psuvm.bitnet!gms
From: GMS@PSUVM.BITNET
Newsgroups: net.micro
Subject: Re: US Robotics Products
Message-ID: <6838GMS@PSUVM>
Date: Mon, 4-Aug-86 16:53:41 EDT
Article-I.D.: PSUVM.6838GMS
Posted: Mon Aug  4 16:53:41 1986
Date-Received: Wed, 6-Aug-86 02:39:29 EDT
References: 2561@brl-smoke.ARPA
Lines: 22

We recently bought 2 US Robotics 2400 baud modems and have had no
problems at 2400 baud or 1200 baud.  I have, however, had some difficulty
with 2400 baud over long-distance lines.  These were likely tracable to
bad phone lines (although it was ATT), otherwise they and other USR
products have worked fine for us.  Perhaps we've just been lucky?
     
-------------------------------------------------------------------------------
                                                       *******
 Gerry Santoro                                       ********  *
 Microcomputer Information & Support Center        ***********   *
 Penn State University                           ********   ***    *
 101 Computer Building                         **********   ***      *
 University Park, PA  16802                   ***************         *
 (814) 863-4356                               ************            *
                                              *********               *
 GMS @ PSUVM   (bitnet)                        *******   **          *
 santoro @ penn-state  (csnet)                   *****   **        *
 ...!psuvax1!psuvm.bitnet!gms   (uucp)             ****          *
 gms%psuvm.bitnet@wscvm.arpa    (arpa)               ***       *
                                                       *******