Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!nbires!isis!ross
From: ross@isis.UUCP (Ross McConnell)
Newsgroups: net.micro.pc
Subject: garbled screen with Autocad on PC'S Limited 286 machine
Message-ID: <963@isis.UUCP>
Date: Mon, 4-Aug-86 00:03:41 EDT
Article-I.D.: isis.963
Posted: Mon Aug  4 00:03:41 1986
Date-Received: Mon, 4-Aug-86 18:45:53 EDT
Distribution: net
Organization: University of Denver Math and Computer Science
Lines: 14



 I have a PC's Limited 286 machine, running at 6 or 8 megahertz. It's
hooked up to a Universal Graphics II card and a "FlatScreen" B&W monitor, also
from PC's Limited. When I try to run Autocad, the menu screens are fine but
any displayed images are garbled - complete junk on the screen. The monitor/
graphics card successfully run the "test.exe" program supplied with the
graphics card. The card is in Hercules mode, and Autocad is configured
for a Hercules card. The machine has a 80287 installed. HOWEVER, when I
replace the monitor with an Amdek 310A, all is fine - perfect images.
   What gives ? Any help would be appreciated. Tech support at PC's
limited is trying to feed me a line that " maybe the FlatScreen monitor
isn't designed to run Autocad, or else it's a bug in Autocad ". This
sounds fishy to me.....