Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rochester!ritcv!msl5864
From: msl5864@ritcv.UUCP (Michael S. Leibow)
Newsgroups: net.micro.trs-80
Subject: Re: comm4
Message-ID: <9884@ritcv.UUCP>
Date: Sun, 27-Jul-86 14:01:04 EDT
Article-I.D.: ritcv.9884
Posted: Sun Jul 27 14:01:04 1986
Date-Received: Sun, 27-Jul-86 21:07:40 EDT
References: <3910@reed.UUCP>
Reply-To: msl5864@ritcv.UUCP (Michael S. Leibow)
Organization: Rochester Institute of Technology, Rochester, NY
Lines: 18

In article <3910@reed.UUCP> johnw@reed.UUCP (John Windberg) writes:
>Does anyone have a termcap entry for comm trsdos6.2 model 4?

M4|trs4|trs-80 model 4:\
        :bc=^X:bw:cr=^]:nl=^Z:cl=^L:up=^[:am:bs:\
	:ho=\034:do=^Z:kb=^H:kd=^J:kl=^H:kr=^I:ku=\013:\
	:li#24:co#80:nd=^Y:ce=^^:so=\020:se=\021:


You can set your baud rate using setcom.  To see what it is set at don't give
it any arguments.  To set baud rate type "setcom (baud=1200)" and it will
change.  Once you have your comm port the way you like it, and everything else
on your disk is fine, than type "sysgen" and it will permanently configure
your setup.
-- 
Michael S. Leibow
UUCP:		{allegra,seismo}!rochester!ritcv!msl5864
CSNET:		msl5864%rit@csnet-relay.ARPA