Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!sri-spam!mordor!lll-crg!gymble!umcp-cs!nbs-amrf!ressler
From: ressler@nbs-amrf.UUCP (Sandy Ressler)
Newsgroups: net.unix-wizards
Subject: Help with TCP on SysV (IRIS)
Message-ID: <358@nbs-amrf.UUCP>
Date: Mon, 7-Jul-86 12:57:07 EDT
Article-I.D.: nbs-amrf.358
Posted: Mon Jul  7 12:57:07 1986
Date-Received: Sat, 12-Jul-86 03:07:44 EDT
Distribution: net
Organization: National Bureau of Standards
Lines: 11

Does any one have any examples of how to write code using the tcp
calls (socket, connect, select) to write a server which can handle
multiple clients, in SysV.  I know how to do this for 4.2bsd but
the network stuff is quite different under SysV.  Any help, pseudo
code, tricks will be appreciated.  Specifically this is for a Silicon
Graphics Iris,  and they don't know much about tcp. Supossedly the
calls are similar to 4.1bsd if that helps anyones memory.
					Thanks in advance...
						Sandy Ressler

..!{umcp-cs | seismo}!nbs-amrf!ressler