Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utcs!mnetor!seismo!umcp-cs!chris
From: chris@umcp-cs.UUCP
Newsgroups: net.unix-wizards
Subject: Re: VAX 730 system
Message-ID: <2502@umcp-cs.UUCP>
Date: Sat, 19-Jul-86 23:53:42 EDT
Article-I.D.: umcp-cs.2502
Posted: Sat Jul 19 23:53:42 1986
Date-Received: Sun, 20-Jul-86 06:37:48 EDT
References: <609@ittvax.ATC.ITT.UUCP>
Reply-To: chris@maryland.UUCP (Chris Torek)
Organization: University of Maryland, Dept. of Computer Sci.
Lines: 13

In article <609@ittvax.ATC.ITT.UUCP> etk@ittvax.ATC.ITT.UUCP writes:
>We're running a VAX/730 system under 4.2bsd, it has an "idc"
>controller for the R80 and RL02 disk plus a UDA50 for an RA81. ...
>everytime I try to access [the RL02] as device "rb1" (rb0 is the
>R80) the system crashes.

I recall a fix for idecc() somewhere along the 4.3 beta test line.
Perhaps your RL02 has a bad spot.  You might try running 4.3 (I
hear it is finally shipping) or poking about in idcecc().
-- 
In-Real-Life: Chris Torek, Univ of MD Comp Sci Dept (+1 301 454 1516)
UUCP:	seismo!umcp-cs!chris
CSNet:	chris@umcp-cs		ARPA:	chris@mimsy.umd.edu