Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!princeton!pep
From: pep@princeton.UUCP
Newsgroups: net.unix-wizards
Subject: Re: 4.3 UDA50 problem with RA80
Message-ID: <1600001@princeton.UUCP>
Date: Thu, 24-Jul-86 11:16:00 EDT
Article-I.D.: princeto.1600001
Posted: Thu Jul 24 11:16:00 1986
Date-Received: Thu, 24-Jul-86 21:30:18 EDT
References: <383@hsi.UUCP>
Organization: CS Department, Princeton University
Lines: 11
Nf-ID: #R:hsi:-38300:princeton:1600001:000:415
Nf-From: princeton!pep    Jul 24 11:16:00 1986

Yes.  The same thing that was going on in the 4.2 /etc/disktab.
In the 4.3 disktab (version 4.11, date 5/31/86) the entry for the RA80
is incorrect (I just ran into the same problem).  The RA80 has 546
cylinders, not 559.  Make the following changes to /etc/disktab:
	:nc#546:
	:pc#236964:
	:pe#187640:
	:pg#187054:
	:ph#105560:
I have made the h partition successfully; I haven't tried e or g.
					Pat Parseghian