Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!nike!ucbcad!ucbvax!kontron.UUCP!cramer
From: cramer@kontron.UUCP (Clayton Cramer)
Newsgroups: mod.computers.laser-printers
Subject: RTS/CTS for Apple LaserWriter Plus
Message-ID: <8608112353.AA08525@kontron.UUCP>
Date: Mon, 11-Aug-86 19:53:56 EDT
Article-I.D.: kontron.8608112353.AA08525
Posted: Mon Aug 11 19:53:56 1986
Date-Received: Tue, 12-Aug-86 17:38:20 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: net
Organization: The ARPA Internet
Lines: 11
Approved: laser-lovers@washington.arpa

This may be a dumb question, but I'm getting frustrated trying to solve
the problem with the Apple manuals for the LaserWriter Plus.

The LaserWriter Plus includes RTS/CTS support, so you don't need an
XON/XOFF driver to use it from the IBM PC.  Is it necessary to set some
switch (hardware or software) for this to take effect?  I recently
tried to use the PC-DOS PRINT command to send a PostScript file to the
LaserWriter Plus.  The LaserWriter Plus printed about two pages, then
stopped.

Clayton E. Cramer