Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!think!nike!ucbcad!ucbvax!ACC.ARPA!gary From: gary@ACC.ARPA Newsgroups: mod.protocols.tcp-ip Subject: confusion Message-ID: <8608190159.AA08298@ucbvax.Berkeley.EDU> Date: Mon, 18-Aug-86 20:09:00 EDT Article-I.D.: ucbvax.8608190159.AA08298 Posted: Mon Aug 18 20:09:00 1986 Date-Received: Tue, 19-Aug-86 23:12:10 EDT Sender: daemon@ucbvax.BERKELEY.EDU Reply-To: Organization: The ARPA Internet Lines: 20 Approved: tcp-ip@sri-nic.arpa First off, I wish to thank all the folks who responded to my inquiry concerning updating of our customer service files. It appears, however that I was not specific enough concerning the differences between HDH and LH or DH connections. By HDH I was referring to either the IF-11/HDH or IF-11Q/HDH boards which implement the 1822-J protocol. The method behind the madness is to have an accurate recording as to where they are deployed so that we may notify the appropriate point-of-contacts in the event changes are made to either the firmware or the driver software to keep them current. Thanks again for all the help... Gary Krall ------