Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!lll-lcc!pyramid!ucat!scc!steiny
From: steiny@scc.UUCP (Don Steiny)
Newsgroups: net.lang.c
Subject: Re: reading directory under SYSTEM V
Message-ID: <717@scc.UUCP>
Date: Sat, 6-Sep-86 14:25:59 EDT
Article-I.D.: scc.717
Posted: Sat Sep  6 14:25:59 1986
Date-Received: Sat, 6-Sep-86 20:38:27 EDT
References: <5770001@acf2.UUCP> <1058@kontron.UUCP>
Organization: Don Steiny Software
Lines: 13
Summary: Here is a shar file that does the trick.  It is from netnews.

**

	In my source for netnews there were some routines that do the trick.
They say for V7, but I have used them on several system V systems.

-----
: This is a shar archieve.  Extract with sh, not csh.
: The rest of this file will extract:
: ndir.c ndir.h
echo extracting - ndir.c
sed 's/^X//' > ndir.c << '~FUNKY STUFF~'
X#include "defs.h"
X#if !defined(BSD4_2) && !defined(BSD4_1C)
X#include <sys/param.h>
X#include "ndir.h"
X
X#ifdef SCCSID
Xstatic char	*SccsId = "@(#)ndir.c	1.8	4/26/85";
X#endif /* SCCSID */
X
X/*
X * support for Berkeley directory reading routine on a V7 file system
X */
X
Xextern char *malloc();
X
X/*
X * open a directory.
X */
XDIR *
Xopendir(name)
Xchar *name;
X{
X	register DIR *dirp;
X	register int fd;
X
X	if ((fd = open(name, 0)) == -1)
X		return NULL;
X	if ((dirp = (DIR *)malloc(sizeof(DIR))) == NULL) {
X		close (fd);
X		return NULL;
X	}
X	dirp->dd_fd = fd;
X	dirp->dd_loc = 0;
X	return dirp;
X}
X
X/*
X * read an old style directory entry and present it as a new one
X */
X#ifdef pyr
X/* Pyramid in the AT&T universe */
X#define ODIRSIZ 248
Xstruct olddirect {
X	long	od_ino;
X	short	od_fill1, od_fill2;
X	char od_name[ODIRSIZ];
X};
X#else /* V7 file system */
X#define	ODIRSIZ	14
X
Xstruct	olddirect {
X	short	od_ino;
X	char	od_name[ODIRSIZ];
X};
X#endif /* V7 */
X
X/*
X * get next entry in a directory.
X */
Xstruct direct *
Xreaddir(dirp)
Xregister DIR *dirp;
X{
X	register struct olddirect *dp;
X	static struct direct dir;
X
X	for (;;) {
X		if (dirp->dd_loc == 0) {
X			dirp->dd_size = read(dirp->dd_fd, dirp->dd_buf, 
X			    DIRBLKSIZ);
X			if (dirp->dd_size <= 0)
X				return NULL;
X		}
X		if (dirp->dd_loc >= dirp->dd_size) {
X			dirp->dd_loc = 0;
X			continue;
X		}
X		dp = (struct olddirect *)(dirp->dd_buf + dirp->dd_loc);
X		dirp->dd_loc += sizeof(struct olddirect);
X		if (dp->od_ino == 0)
X			continue;
X		dir.d_ino = dp->od_ino;
X		strncpy(dir.d_name, dp->od_name, ODIRSIZ);
X		dir.d_name[ODIRSIZ] = '\0'; /* insure null termination */
X		dir.d_namlen = strlen(dir.d_name);
X		dir.d_reclen = DIRSIZ(&dir);
X		return (&dir);
X	}
X}
X
X/*
X * close a directory.
X */
Xvoid
Xclosedir(dirp)
Xregister DIR *dirp;
X{
X	close(dirp->dd_fd);
X	dirp->dd_fd = -1;
X	dirp->dd_loc = 0;
X	free((char *)dirp);
X}
X#endif /* !BSD4_2 && !BSD4_1C */
~FUNKY STUFF~
echo extracting - ndir.h
sed 's/^X//' > ndir.h << '~FUNKY STUFF~'
X/* @(#)ndir.h	1.4	4/16/85 */
X#ifndef DEV_BSIZE
X#define	DEV_BSIZE	512
X#endif
X#define DIRBLKSIZ	DEV_BSIZE
X#define	MAXNAMLEN	255
X
Xstruct	direct {
X	long	d_ino;			/* inode number of entry */
X	short	d_reclen;		/* length of this record */
X	short	d_namlen;		/* length of string in d_name */
X	char	d_name[MAXNAMLEN + 1];	/* name must be no longer than this */
X};
X
X/*
X * The DIRSIZ macro gives the minimum record length which will hold
X * the directory entry.  This requires the amount of space in struct direct
X * without the d_name field, plus enough space for the name with a terminating
X * null byte (dp->d_namlen+1), rounded up to a 4 byte boundary.
X */
X
X#ifdef DIRSIZ
X#undef DIRSIZ
X#endif /* DIRSIZ */
X#define DIRSIZ(dp) \
X    ((sizeof (struct direct) - (MAXNAMLEN+1)) + (((dp)->d_namlen+1 + 3) &~ 3))
X
X/*
X * Definitions for library routines operating on directories.
X */
Xtypedef struct _dirdesc {
X	int	dd_fd;
X	long	dd_loc;
X	long	dd_size;
X	char	dd_buf[DIRBLKSIZ];
X} DIR;
X#ifndef NULL
X#define NULL 0
X#endif
Xextern	DIR *opendir();
Xextern	struct direct *readdir();
Xextern	void closedir();
~FUNKY STUFF~
exit 0;


-- 
scc!steiny
Don Steiny @ Don Steiny Software 
109 Torrey Pine Terrace
Santa Cruz, Calif. 95060
(408) 425-0382