Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!caip!sri-spam!nike!ucbcad!ucbvax!sdcsvax!rick
From: rick@sdcsvax.UUCP (Rick Randall)
Newsgroups: net.micro,net.micro.pc
Subject: Re: HELP with ProComm 2.3 problems please!
Message-ID: <2012@sdcsvax.UUCP>
Date: Mon, 25-Aug-86 01:50:06 EDT
Article-I.D.: sdcsvax.2012
Posted: Mon Aug 25 01:50:06 1986
Date-Received: Mon, 25-Aug-86 19:35:43 EDT
References: <216@octopus.UUCP>
Reply-To: rick@sdcsvax.UUCP (Rick Randall)
Organization: EECS Dept, U.C. San Diego
Lines: 26
Xref: mnetor net.micro:5913 net.micro.pc:6272

In article <216@octopus.UUCP> pete@octopus.UUCP (Pete Holzmann) writes:
>I grabbed a copy of ProComm 2.3 several days ago. It seems like a very nice
>program, but also rather buggy. It has a *very* annoying tendency to lock
>up completely, and has trouble with terminal emulations. Has anybody else
>had and/or solved these problems?
>
>	- Alt-S (setup) locks up an AT every time (IBM and clone. A second
>		clone didn't have trouble)
>	- Kermit transfers tend to get locked up
>	- It frequently locks up when you aren't receiving anything (goes
>		into a receive loop at the wrong time?)
>  ...

Never had any of these problems on my PC or on my Orchid 286e
expansion board (like an AT on the PC).  Procomm 2.3 has worked
beautifully by and large -- definitely the best PD comm program
I've found.  Sorry about your problems -- and I can't suggest
remedies;  perhaps you should register and then ask for support
from the author(s).

	Rick Randall    EECS Department 
			University of California, San Diego
			
	decvax\ 	rick@sdcsvax.ucsd.edu
	ihnp4  >--->	sdcsvax  ---> rick
	ucbvax/		rick@sdcsvax.uucp