Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!columbia!caip!clyde!cbatt!cbosgd!ihnp4!houxm!hjuxa!petsd!moncol!john From: john@moncol.UUCP (John Ruschmeyer) Newsgroups: net.micro,net.micro.pc Subject: Re: HELP with ProComm 2.3 problems please! Message-ID: <294@moncol.UUCP> Date: Sat, 23-Aug-86 20:02:01 EDT Article-I.D.: moncol.294 Posted: Sat Aug 23 20:02:01 1986 Date-Received: Tue, 26-Aug-86 03:00:18 EDT References: <216@octopus.UUCP> Reply-To: john@moncol.UUCP (John Ruschmeyer) Organization: Monmouth College, West Long Branch, NJ 07764 Lines: 36 Xref: mnetor net.micro:5916 net.micro.pc:6273 In article <216@octopus.UUCP> pete@octopus.UUCP (Pete Holzmann) writes: >I grabbed a copy of ProComm 2.3 several days ago. It seems like a very nice >program, but also rather buggy. It has a *very* annoying tendency to lock >up completely, and has trouble with terminal emulations. Has anybody else >had and/or solved these problems? > > - TVI 925/950 emulation locks up often when things like 'sysline' > try to write to the status line > - TVI 950 isn't worth beans in vi. There are two major problems with the Televideo emulations that I have found: 1) The Home Cursor character (Control-^) is not supported (really odd since they did set it up for the HOME key to send that character). For me a quick fix was to set up a seperate termcap entry for the PROCOMM emulation which just used the standard one, but with the 'ho' attribute left undefined. 2) There seems to be a bug in how the status line is updated. If it is already enabled (via an ESC-g) and then updated (via an ESC-f), the new contents are *not* shown until the status line is disable and then re-enabled. Hope this is of help. -- Name: John Ruschmeyer US Mail: Monmouth College, W. Long Branch, NJ 07764 Phone: (201) 571-3451 UUCP: ...!vax135!petsd!moncol!john ...!princeton!moncol!john ...!pesnta!moncol!john NOMAD: ... a mass of conflicting impulses. Absorbing it unsettled me. SPOCK: That unit was Rich Rosen. from "Rosen Trek"